Umbrella Company / SIGNALFORM ORGANIZER

A high-quality, multi-functional tool that combines DI, reverse DI, and level converter.

SIGNALFORM ORGANIZER is a multifunctional professional tool that combines DI, reverse DI, and level converter in a half-rack size.

The DI section pursues clear sound quality with no coloration. By using the dedicated ""active DI cable"", you can obtain an extremely pure signal without the tone change caused by shielded cables.

The reverse DI (reamp) section uses an original ""transformerless circuit"". You can reproduce a performance that is more realistic than ever before.

As an application, you can properly manage the ""Signal Form"" even if an engineer wants to use a guitar pedal during mixing or a musician wants to use studio equipment on the pedal board.

Meets professional standards in all sound quality and functions. It can be used as a studio equipment for sound engineers, as a sound tool for guitarists/bassists, and is an all-purpose tool for recording and live performances.

Sales points
1. Three functions in one unit: DI, reverse DI (reamp), and level converter, for proper management of signal form between professional audio and instruments.
2. Clear DI sound with absolutely no coloration. Using an active DI cable will give you even higher quality DI sound.
3. Transformerless circuit design provides completely uncolored reverse DI (reamp) signal.
4. Unbalanced (-10dB) and balanced (+4dB) level conversion.
5. Functions and operability that allow you to always quickly obtain the correct signal.

Specifications
■DI
Frequency Response: 2Hz to 22kHz (±0.1dB) @ Hi-Z IN → DI OUT　
Distortion Ratio: 0.0004% @ Hi-Z In → Amp Out / DI OUT　+20dBu Input
Maximum Input Level: +20dBu @ Hi-Z In / Active Hi-Z In
Maximum Output Level:
　+20dBu @ Amp Out 1, 2
　+26dBu @ Line Level Out
　0dBu @ Mic Level OUT
Dynamic Range
　118dB @ Line Level Out
　112dB @ Mic Level Out
■REVERSE DI
Frequency Response: 2Hz to 22kHz (＋0dB / -0.5dB) @ Line Level In → Inst Level Out　
Distortion Ratio: THD+N: 0.0003% @Line Level In → Inst Level Out +26dBu Input
Maximum Input Level: +26dBu @Line Level In
Maximum Output Level: +18dBu @Inst Level Out
Dynamic Range: 115dB @Line Level Out
POWER: AC9V 500mA (lock adapter specification)
■DEMENTIONS / WEIGHT
Size
W: 216mm (half rack size)
D: 148mm (excluding protrusions / protrusion size front 14mm rear 14mm)
H: 41mm (excluding rubber feet / rubber foot height 3mm)
Weight: 1460g
Accessories: Dedicated power adapter, Active Hi-Z Cable (4m), warranty card, instruction manual