Neunaber Audio Effects / ELEMENTSEE

Elements Echelon Echo is a digital delay that reproduces the warm, analog-style echo sound with the high-level realism unique to Neunaber Audio Effects.

■Guitar Effects
■Echo
■Features
・Mix control allows 100% wet setting
・Tap tempo allows subdivision setting
・Delay time up to 1 second
・Bypass mode can be set
・Analog dry through for low noise and zero latency
・Compact size
・Powered by standard DC9-12V adapter (batteries cannot be used.)
・Made in Orange County, California USA
■Controls
・Mix
The Mix knob controls the balance between the dry signal and the reverb sound.
At the minimum counterclockwise, it is 100% dry, and at the maximum clockwise, it is 100% reverb (kill dry). At around 3 o'clock, it is 50%:50%.
The Mix knob is designed to allow fine adjustment, so you can easily adjust the strength of the reverb by simply turning the knob.
・Repeats
Sets the number of echo repeats.
・Time
Sets the delay time in the range of 50ms to 1000ms.
When in tap tempo mode, this knob sets the tempo subdivision. The subdivisions that can be set are as follows:
・1: quarter note
・3/4: dotted eighth note
・1/2: eighth note
・1/3: eighth triplet
・1/4: sixteenth note
・1/16: sixteenth triplet
■Specifications
Input level (Mix<60%): +4 dBV, Instrument Level
Input level (Mix>60%): -10 dBV, Instrument Level
Input impedance: 1 MΩ (mono)
Output impedance: 1 kΩ (mono)
Gain (active/bypass): +/-0.5 dB (dry signal only)
Frequency response: 20 Hz to 20 kHz, +0.1 dB, -0.5 dB (dry signal or bypassed)
Total harmonic distortion: < 0.0015 % typical (dry signal or bypassed, 22 Hz to 22 kHz, 1.0 Vrms, 1 kHz)
S/N: 109 dB dry/bypassed signal (typical, A-weighted), 100 dB Mix @ 50% (typical, A-weighted)
Power terminal: 9-12 V DC, 80 mA　 Plug: center-negative, 5.5 mm OD x 2.1 mm ID
Dimensions: 73 mm W, 117 mm L, 51 mm H
Weight: 200g