NOBUNAGA LABS / NLHITK

NOBUNAGA Labs' Itakeru is a 4.4mm 5-pole balanced hybrid cable compatible with the high-resolution headphones MDR-1AM2. It maximizes the potential of your headphones.

■ An 8-core hybrid cable that supports 4.4mm 5-pole balanced connection to fully utilize the potential of headphones.
■ The wire material uses 7N-OCC wire, which reduces transmission loss and allows for a wide sound field, and pure silver wire, which allows for clear and improved resolution. It faithfully transmits the original sound of the original sound.
■ The 3.5mm 4-pole plug uses NOBUNAGA LABS NLP-PRO-IS3.5/4. The plug body is gold-plated on all contact parts to maximize sound separation. It is possible to maximize the potential of the headphones.
■ The 4.4mm 5-pole plug is gold-plated on all contact parts to provide excellent electrical conductivity. In addition, by applying a special treatment to the flash plating process, problems such as plating peeling and oxidation erosion are prevented, and high-level quality is achieved over the long term.
■ The plug shell uses a short shell that is shorter than the size included with the NLP-PRO-TP4.4/5.
■Through full-scale cryo-processing, electrical resistance is reduced and the current flow is improved. The signal-to-noise ratio is increased, reducing noise and distortion.

■Cable: 7N OCC 4-core silver-plated + 4N pure silver 4-core
■Cable length: 120cm
■Device plug: 4.4mm 5-pole straight plug (NLP-PRO-TP4.4/5), *Short shell specification
■Headphone plug: 3.5mm 4-pole straight plug (NLP-PRO-IS3.5/4)
■Impedance: 0.28Ω
■Cryo treatment: -156℃/72 hours
■Warranty: 3 months

■Headphone side: SONY MDR-1AM2/MDR-1A/MDR-100A
■4.4mm 5-pole plug side: SONY NW-WM1Z/NW-WM1A/NW-ZX300/PHA-2A, other 4.4mm 5-pole compatible players