ERNIE BALL / EB6183

An expression pedal-type overdrive that wasn't available as a standalone device

The Expression Overdrive [#6183] with expression pedal is a model that features a wide range of natural overdrive like a vacuum tube.
The control on the back allows you to set the drive, boost, and tone. By stepping on the foot pedal, you can freely increase/decrease the amount of overdrive, allowing for fuzzy expressions that were not possible with an ON/OFF switch.
The pedal top uses non-slip rubber and is combined with a sturdy metal chassis with gold plating, allowing for stable pedal operation with a moderate weight and size. The power supply uses a commercially available power supply (DC9V/center negative).

■Instrument input/output terminals: 1/4 inch standard mono
ral phone jack
■Input impedance: 1MΩ
■Output impedance: < 10KΩ
■Current consumption: 18mA
■Power supply: 9VDC (sold separately)
■Power supply input terminal polarity: center negative
■Power supply input terminal compatible size: outer diameter 5.5mm / inner diameter 2.1mm
*If using a commercially available power supply, be sure to use one that meets the standards.
■Current consumption: Recommended 300mA or more
■Size: 92(W) x 192(L) x 55(H)mm
■Weight: 894g