KORG / DS-DAC-10R USB-DAC

USB-DAC

■ Realize DSD recording only with "DS-DAC-10R" and "Audio Gate 4".
・Recording/playback supports formats up to 5.6MHz, 2.8MHz for DSD and up to 192kHz/24bit for PCM.
■ Equipped with a phono input terminal that can be directly connected to a record player.
・Equipped with a phono input terminal and a ground terminal that can be directly connected to a record player. It is possible to convert the record into high resolution data with high sound quality by DSD and manage the song on AudioGate. The input terminal also supports LINE level input.
■ Built-in DSD phono equalizer.
・In addition to general RIAA, it is possible to support 5 types of curves, so that not only can you record when recording, but you can also postpone the original sound of the input/recorded record as it is.
■ Uses carefully selected parts to achieve the best sound quality.
・Adopt PCM4202 (TI) for AD converter. The high-performance parts such as OPA1662 (made by TI) and thin film polymer multilayer capacitors (made by PMLCAP/Rubycon) are used for the pre-stage circuit of the phono amplifier, and the performance of the phono cartridge is fully utilized. For the DA converter, select CS4398 (Cirrus Logic), which is the same as the MR-2000S and DS-DAC series. The original sound is faithfully reproduced without adding color to the sound.
■ Supports "DSD native playback" of 2.8224MHz and 5.6448MHz DSD files.

◇Audio interface
■ Number of channels: 2 channels
■ Input format (USB): DSD: 2.8224MHz / 5.6448MHz, 1bit, PCM: 44.1kHz / 48kHz / 88.2kHz / 96kHz / 176.4kHz / 192kHz, 16bit / 24bit
■ Host interface: USB2.0 (high speed)
■ Audio driver: ASIO2.1, WDM, Core Audio
◇Main standards
■ Frequency characteristics: 10Hz to 20kHz ±1dB (fs=44.1kHz / 48kHz), 10Hz to 40kHz ±1dB
■ S/N: 105dB (TYP.) 20Hz ~ 20kHz, IHF-A
■ THD+N: 0.005% (TYP.) 20Hz ~ 20kHz
◇LINE OUT L/R
■ Shape: RCA pin jack (unbalanced)
■ Load impedance: 10kΩ or more
■ Standard/maximum level: -6dBV / +6dBV
◇PHONES
■ Shape: φ6.3mm stereo phone jack
■ Load impedance: 16Ω or more
■ Maximum output: 70mW+70Mw@32Ω
◇LINE IN, PHONO L/R
■ Shape: RCA pin jack
■ Input impedance: 47KΩ (LINE) / 50KΩ (PHONO)
■ Specified level: -6dBV (LINE)/5mVrms (PHONO)
■ Maximum level: +6dBV (LINE) / 100mVrms (PHONO)
◇USB (device)
■ Shape: Type B
◇General
■ Indicator: Ring LED indicator (displays sampling frequency and REC status in color)
■ Power supply: USB bus power (5V 500mA)
■ Power consumption: Up to 2.5W
■ External dimensions: 155 (W) x 184 (D) x 49 (H) mm (including protrusions)
■ Mass: 1.1kg
■ Accessories: USB cable