1ch belt pack station. The body has a simple and easy-to-use design, and in addition to the talk/call buttons, it is equipped with a DIP switch that can be customized. It is the best tool for smooth cooperation between staff.
[直輸入品][Direct Import]
■ 1ch specification belt pack
■ Simple and functional design
■ Belt clip can rotate 90 degrees
■ Some functions can be customized with DIP switches
[General]
・Operating voltage: 12V to 30V
・Operating temperature: 0° to 70°
・Current consumption: ~12mA (when all inputs are off)
・Dimensions (excluding protrusions): 86.4 (H) x 114.3 (W) x 43.2 (D) mm
・Weight: 0.31kg
[Mic preamplifier]
・Frequency characteristics: 280Hz to 15kHz ±3dB
・Distortion rate: <0.1%
・S/N ratio:> 65db
[Headphone amplifier]
・Frequency characteristics: 150-20kHz ±3dB
・Distortion rate: <0.5%
・S/N ratio:> 50dB
・Crosstalk:> 80dB
・Side tone signal:> 45dB (-80dB mic input)
[Connector]
・Intercom line: XLR 3-pin male x 1, XLR 3-pin female x 1
・Headset: XLR 4-pin male seat x 1
[DIP switch]
1) Microphone type selection: ON = Dynamic (default), OFF = Electret
2) Headset output: ON = High (default), OFF = Low
*The default setting at the manufacturer is Low, but High is the default setting for domestic shipments.
3) Minimum volume: ON = Mute at min level (default), OFF = Not silent at min level
4) LED settings: ON = LED normal operation (default), OFF = All LEDs dark
5) Call on talk setting: ON = Call occurs operation, OFF = No call when talk on (default)
6) Toe clutch setting: ON = Latch enabled (default), OFF = Latch disabled
関連商品
商品レビューProduct Review
すべてのレビューを見る