SONIC / 579768

The SONIC / TT-101 TURBO SWITCH TC USA is a turbo switch for Telecasters that use the inch standard, such as Fender USA. It transforms your Telecaster into one with bold power while preserving its original sound and appearance.

■Turbo Switch for Telecasters
■Inch Size
(Threaded Pot Diameter: 3/8 inch)
■Control Layout: Master Volume / Master Tone and Turbo ON/OFF
■Controls
~The tone knob is a push-pull turbo ON/OFF switch~
~Turbo OFF: Tone control not pulled up~

This is the same as a regular Telecaster, allowing you to produce the sound of the front, mix, and rear single-coil pickups.
~Turbo ON: Tone control pulled up~
・The front and rear single-coil pickups are connected in series, producing a powerful sound regardless of the pickup selector position.
・Unlike the normal center position, which mixes them in parallel, the sound is reliably thicker and more powerful. If the front and rear pickups are reverse polarity, noise cancellation is also achieved.
・The tone control can be used regardless of whether the turbo is on or off.
■ Passive type, no battery required

~From the manufacturer's website~
The ""Turbo Switch TC"" is an original circuit that transforms a standard Telecaster into a guitar with powerful, powerful tone when you need it most, without changing its appearance or compromising its original sound. It connects the Telecaster's two single-coil pickups in series to extract power. It's not a preamp, so no batteries are required. When installed, the tone knob becomes a push-pull switch. As shown in the image to the right, pressing it down activates the normal setting, while pulling it down activates the turbo setting. Of course, turning it also functions as a tone control. The pickup selector switch is made by CRL (American company) for durability, and the tone circuit uses oil capacitors for a smooth, dynamic tone.

*Images are for illustrative purposes only.
*When replacing guitar/bass parts, there may be slight differences in specifications, so installation is not guaranteed. Please note that part replacement requires modification.