JVC / PA-916 Power Amplifier

Equipped with nine input terminals that can be connected to a variety of functions, and equipped with separate switches for ""emergency broadcast"" and ""broadcast,"" it supports a wide range of situations.

こちらの
商品も
オススメ！

CLASSIC PRO ハイインピーダンスパワーアンプ CMP-250

モノラル、250W、2U、24kg

■9 input terminals for connecting a variety of functions (up to 11 inputs when wireless integration is enabled)
　　・4 wired microphone inputs (2 switches between microphone and line), 2 external inputs
　　・Separate remote control and paging inputs
　　・3.5mm mini-plug input on the front panel for audio input from a computer, etc.
■Two types of simultaneous broadcasts possible
　　・Independent switches for ""Emergency Simultaneous Broadcast"" for emergencies and ""Simultaneous Broadcast"" for general broadcasts. You can use them according to your needs.

　　■Equipped with a microphone insertion terminal
　　・Enabling connection of devices such as equalizers and feedback suppressors.

■ Rated Output: 160 W (63 Ω, high-impedance speaker output)
■ Direct Speaker Output: 4 Ω–16 Ω (terminal inside rear cover)
■ Speaker Control Output: 5 lines (high-impedance speaker output)
■ Frequency Response: 50 Hz–20 kHz, -1 dB ±3 dB (External 3 input, output at -10 dB from rated output, 1 kHz: 0 dB)
■ Distortion: 0.5% or less (External 2 input, rated output, 1 kHz)
■ Input Circuit:
・Microphone 1 & 2: -60 dBs/1 kΩ, electronically balanced, φ6.3 duplex phone jack
・Microphone 3/External 1: -60 dBs/1 kΩ, -10 dBs/20 kΩ switchable, electronically balanced, φ6.3 duplex phone jack
・Microphone 4/External 2: -60 dBs/1 kΩ, -10 dB/20 kΩ switchable, electronically balanced, φ6.3 duplex phone jack
- External 3 & 4: -10 dBs/5 kΩ, unbalanced, 2 x phono jacks
- Front external input: -10 dBs/5 kΩ, unbalanced, φ3.5 stereo mini jack (mixed with external 4)
- Remote microphone: 0 dBs/2 kΩ, transformer-balanced, terminal board
- Paging: 0 dBs/2 kΩ, transformer-balanced, terminal board
- Power amplifier input: 0 dBs/2 kΩ, unbalanced, phono jack
- Microphone insertion: -20 dBs/2 kΩ, unbalanced, phono jack

■ Output Circuit
- Recording output: 0 dBs/5 kΩ, unbalanced, 2 x phono jacks
- Line output: 0 dBs/5 kΩ, unbalanced, phono jack

■ Included Features
- Volume control (semi-fixed volume)
- Tone control (treble 10 kHz ±12 dB, bass 100 Hz ±12 dB)
Speaker line selection (All (normal), Emergency All, 1-5)
3-point output level display
4-tone chime (upstream/downstream)
Emergency audio shutoff circuit
Paging priority circuit
Remote control microphone priority circuit

■External Control
-Power activation input
-Speaker line selection input
-Emergency audio shutoff input
-4-tone chime (upstream/downstream) activation input
-DC 24 V output
-Built-in optional control input/output
-Speaker controller PA-X23 connection possible

■Power supply: AC 100 V, 50 Hz/60 Hz
■Power consumption: 110 W (Electrical Appliance and Material Safety Act), 290 W at rated output, 3 W when power is off
■AC outlets: 2 x uncoupled with power switch
■External dimensions: 420 mm (W) x 137 mm (H) mm x 312 mm (Depth)
■Weight: 8.3 kg

■Finish:
- Front Panel: ABS resin, light gray paint (approximate Munsell 3Y6/0.6, approximation of Nippon Paint DN-65 (2007))
- Top Cover: SPCC steel plate, light gray, baked finish (same as above)
- Rear Panel: SPCC steel plate, black, baked finish

■Accessories: Display label x 1

■Installable Units
- Wireless Tuner Unit: WT-UD80 x 2
- Wireless Tuner Panel: WT-P882-G
- Radio Tuner Unit: PA-F2-G
- Programmable Timer: PA-TU20

■Rack Mountable
- EIA3U (using PA-U13)