BABICZ / FCH4BK

This is a replacement bridge for the standard 5-point bridge for Fender Precision Bass, Jazz Bass, and other 4-string basses. It features BABICZ's proprietary eCAM saddles, which provide approximately 50 times the adhesive surface area of ??standard saddles. Mounting screws, instructions, and an adjustment wrench are included.

■Bass Bridge
■Five-Point Locking
■Original Series
■Aluminum
■Top Load
■String Spacing: 0.75"" (approx. 19mm)
■Black
■Accessories: Mounting screws, instruction manual, adjustment wrench
■Weight: Approx. 104.9g

~From the Manufacturer~
The FCH-4B is a replacement bridge for the five-point locking bridges found on standard four-string basses, such as the Fender Precision Bass and Jazz Bass. Traditionally, the only contact between the saddle and baseplate was two set screws. The FCH-4B saddles always have a tight contact surface with the baseplate, regardless of string height. Compared to saddles supported by only two set screws, this bridge boasts 50 times the contact area, and 200 times the contact area for the entire bridge. This eliminates loss of sustain and vibration to the body. String height adjustment is achieved using the eCAM The center of the saddle rotates, allowing the string height to be adjusted up and down. The bottom of the saddle always remains in close contact with the base plate, preventing the saddle from tilting, allowing for precise string height adjustment. It also features a screw that locks the saddle to the base plate, ensuring exceptional stability.