SONIC / TJ-101

The SONIC / TJ-101 TURBO J-BASS USA turbo blender is designed for standard jazz basses that use the inch standard, such as Fender USA. It transforms your bass into one with bold power while preserving its original sound and appearance.

■Turbo Blender for Jazz Bass
■Inch Size
(Threaded Pot Diameter: 3/8 inch)
■Control Layout: Front Volume / Rear Volume / Tone Control and Turbo ON/OFF
■Controls
~The tone knob is a push-pull turbo ON/OFF switch~
~Turbo OFF: Tone control not pulled up~
The same state as a regular jazz bass, and the tone control can also be used.
~Turbo ON: Tone control pulled up~
・The two single-coil pickups (front and rear) are connected in series and function as a single humbucking pickup.
・Unlike mixing them in parallel (normally at full volume), the sound is noticeably thicker and more powerful. Since most jazz bass pickups have opposite polarities, noise cancellation is also achieved.
・When turbo is on, the volume is controlled by the volume control on the front (usually the front). The rear volume does not function. The tone control can be used regardless of whether turbo is on or off.
■ Passive type, no batteries required

~From the manufacturer's website~
The ""Turbo J Bass"" is an original circuit that transforms a standard Jazz Bass into a bass with powerful power when you need it most, without changing its appearance or compromising its original sound. It functions as a single humbucking pickup, and since it's not a preamp, no batteries are required. When installed, the tone knob becomes a push-pull switch; as shown in the image to the right, it's in its normal position when pressed and in its turbo mode when pulled. Of course, turning it also functions as a tone control. The jacks are made by USA Switchcraft for durability. Additionally, the Turbo J Bass 2 features full-up potentiometers for volume and tone, bypassing the circuit when turned full to improve clarity.

*Images are for illustrative purposes only. *When replacing guitar/bass parts, there may be slight differences in specifications, so we do not inspect or guarantee installation. Please be aware that part replacement requires modification.