Drivers Best Sellers Ranking

1. 
   • CLASSIC PRO / ED3402
   • 3,580 yen(incl. tax)
   • （18）
   • The ED3402 is a driver. The throat diameter is 1 inch. The power rating is 20W (RMS) and the impedance is 8Ω. Compatible with CSP8/CSP8P/CSP10/CSP10P/CSX10/CSX10P.
   • In Stock
   • 
2. 
   • UNI-PEX / P-1000
   • 23,400 yen(incl. tax)
   • The P-1000 is a driver unit made by UNI-PEX, and the connector is a T-type terminal.
   • Special Order
   • 
3. 
   • CELESTION / T5916
   • 4,980 yen(incl. tax)
   • This is a replacement compression driver with an input capacity of 15W, a 1-inch throat diameter, and a ferrite magnet.
   • Approx. 1.5 months
   • 
4. 
   • JBL / 2414H-C Driver
   • 9,980 yen(incl. tax)
   • The 2414H-C is a JBL driver. It is a replacement part for the JRX212/215/225 and PRX412M/415M/425.
   • In Stock
   • 
5. 
   • EMINENCE / ASD1001 8Ω PA Speaker Replacement Driver
   • 6,580 yen(incl. tax)[Direct Import]
   • （1）
   • This is a replacement driver for 8Ω PA speakers from the popular manufacturer EMINENCE. It has a frequency range of 2500Hz-20kHz and is attached with a screw-type screw.
   • In Stock
   • 
6. 
   • EMINENCE / ASD1001B
   • 6,580 yen(incl. tax)
   • （2）
   • This PA speaker replacement driver from the popular brand EMINENC is a two-point bolt-on attachment. Its input rating is 50W and it's compatible with 8Ω speakers.
   • Back Order
   • 
7. 
   • CLASSIC PRO / PA10/4HF
   • 1,980 yen(incl. tax)
   • （3）
   • The PA10/4HF is a piezo tweeter. Compatible with the PA10/4 and PA12/6. This is a replacement speaker part.
   • In Stock
   • 
8. 
   • Fostex / FT17H
   • 7,200 yen(incl. tax)
   • （4）
   • The FT17H is a low-profile horn tweeter with a canceling magnet. It reproduces clear, expansive music.
   • Special Order
   • 
9. 
   • Fostex / FT28D
   • 12,000 yen(incl. tax)
   • The FT28D is a dome tweeter. The output sound pressure level is 90dB. The impedance is 8Ω.
   • Special Order
   • 
10. 
    • CLASSIC PRO / 44ED25-8
    • 6,980 yen(incl. tax)
    • （9）
    • CPD44II is a driver. Compatible with CP10II/CSX12/CSX12P. Allowable input power is 35W, impedance is 8Ω.
    • In Stock
    •