UNI-PEX / DU-3200A

Variations

This 300MHz wireless tuner unit uses a crystal-controlled PLL synthesizer system, allowing you to select any one of 13 frequencies. Noise reduction and tone squelch provide a wide dynamic range and reduce noise when the wireless microphone is turned on and off. To avoid interference and noise, you can switch the reception sensitivity to limit the reception area.

■ Power Supply: DC12V (powered from the embedded device)
■ Current Consumption: Approximately 100mA
■ Receiving Frequency: 322.025MHz - 322.150MHz, 322.250MHz - 322.400MHz (13 frequencies, 25kHz intervals)
■ Receiving Method: PLL-Controlled Double Superheterodyne
■ Receiving Sensitivity: Less than 20dBμV (S/N 45dB ±2.25kHz FM)
■ Squelch Sensitivity: 21dBμV
■ Receiving Indicator: Two Bi-Color LEDs (Red during standby, Green during reception for selected receiver, Red for unselected receiver)
■ Rated Output Power: -20dBV
■ Distortion: Less than 3% (±8kHz FM)
■ Frequency Response: 50Hz - 7kHz (1kHz reference) 50μs emphasis)
■ Operating temperature range: 0°C to +40°C
Exterior: Panel (ABS resin): Black painted (approximate Munsell N1 color), Case (plated steel)
■ Dimensions: Width: 84mm, Height: 30mm, Depth: 148mm
■ Weight: Approximately: 200g

■ Accessories
- Instruction manual (with warranty) x 1
- Channel setting screwdriver x 1
- UNI-PEX contact list x 1