ELECTRO-HARMONIX / Deluxe Bass Big Muff Pi 2 Fuzz

This is the flagship bass fuzz model, a dramatic evolution based on the legendary dual op-amp circuit. In addition to a BLEND function that blends the original signal, it features a CROSSOVER function that divides the frequency band, and is equipped with a high-performance noise gate (GATE), allowing for tight and quiet playing even with deep distortion. With a switch that changes the effect depending on how you step on it and a variety of output terminals, this unit embodies the ideal bass fuzz, from the stage to the recording.

Features

* **Traditional Big Muff Pi circuit employing two dual Op-Amps (operational amplifiers).**

* **BLEND:** Adjusts the balance between the fuzz sound and the clean (original) sound.

* **CROSSOVER:** Splits the signal into low and high frequencies. A high-pass filter (HPF) functions before the fuzz circuit, and a low-pass filter (LPF) functions on the original signal side, creating edgy distortion while maintaining a solid bottom end.

* **Input Pad:** Equipped with a -10dB attenuator switch for high-output active basses, etc.

* **The switch supports momentary function.** Pressing and holding for 0.5 seconds or more activates the effect (or crossover) while the foot is pressed, and instantly returns to the previous state when released. A short tap performs normal latch switching.


■Bass Effects Pedal

■Fuzz, Distortion, Sustainer

■Controls: VOLUME, Sustain, Tone, Blend, Gate (Noise Gate), HPF (Crossover), LPF (Crossover), INPUT Switch (-10dB)

■Buffered Bypass

■Output Terminals: DI OUTPUT, DIRECT OUT

■Power Supply: DC 9V general-purpose power adapter (sold separately)

■Current Consumption: 45mA

■Dimensions: Approx. 14.6 × 12.1 × 6.4 cm (5.75 x 4.75 x 2.5 inches)