STRYMON / PCH X2 Direct Box

<> The PCH X2 is essentially two X1 units housed in the same chassis, with nearly identical performance and operating characteristics. Each channel's audio signal passes through a specially designed transformer, eliminating most ground loops and achieving complete galvanic isolation.

Building on the immense popularity of the PCH DI box, known for its transparent nuances and versatile utility, two new DI boxes have been added to the lineup: the PCH X1, a simpler mono DI ideal for the final stage of a guitar or bass effects board, and the PCH X2, a stereo DI ideal for synthesizers, keyboards, and other stereo sources.

Equipped with a ground lift switch for each channel to suppress hum noise, and featuring a three-stage high-pass filter, the low frequencies can be cut at two points: 80Hz to suppress low-frequency beats, and 240Hz to isolate the low frequencies in the mix, creating space in the bass range of other instruments.

■Specifications

* Maximum Input Level: +20.5dBu
* Maximum Output Level: +0.5dBu
* Gain relative to Input: -20dB

* Input Impedance: 2MΩ
* Output Impedance: 100Ω

* +/- 0.5dB, 10Hz - 80kHz (13.6K load, HPF off)
* Very low distortion, flat & wide frequency response

* Power Supply: 48V Phantom Power (required per channel)
* Current Consumption: 5mA @ +48VDC

* Dimensions: L ? 93mm x W ? 107mm x H ? 39mm