LOGOS / Vacuum-insulated ""Hot/Cold"" PET Bottle Cylinder, Green

Vacuum-insulated for superior cooling and heat retention! Compatible with large 660ml bottles and cans.

This bottle holder from LOGOS features a unique vacuum insulation structure that keeps bottled and canned beverages cold or hot for extended periods.

By employing a vacuum insulation structure not only at the bottom but also at the top of the holder, it achieves high heat retention and cooling performance.

It accommodates a wide range of bottle sizes, from approximately 300ml to 670ml, including wide-necked bottles and cans. Furthermore, using it with the separately sold Ice Pack Compact provides even greater cooling power, and the raised base allows it to accommodate shorter bottles as well. With a convenient handle for easy carrying, it's versatile enough for both outdoor activities and everyday use.

■ High Heat Retention and Cooling Performance through Overall Vacuum Insulation

Employs LOGOS' unique overall vacuum insulation structure. Vacuum insulation is applied not only at the bottom but also at the top of the holder, blocking heat from almost all directions.

It is highly resistant to ""heat from above,"" such as sunlight, allowing you to keep drinks colder for longer, even when using it outdoors.

■ Wide Size Compatibility

Accommodates a wide range of sizes, with a maximum diameter of 7.2cm and heights of 17.5cm to 20.5cm.

The bottle capacity is approximately 300ml to 670ml.
*When used in combination with the Ice Pack Compact (sold separately), it is compatible with short bottles up to 14.5cm in height and approximately 300ml in volume. It is also compatible with bottles and cans with wide openings, making it highly versatile.

[Cooling Performance Experiment]

Two PET bottles with water at 2°C were prepared. One bottle was treated with this product, and the other was left as is.
Both PET bottles were placed in a location exposed to direct sunlight at an ambient temperature of 21°C and observed.

After 100 minutes, the water temperature in the bottle without this product was 34.8°C.
On the other hand, the water temperature in the bottle with this product remained at 8.2°C, maintaining a refreshingly cold temperature, and the rate of temperature rise was reduced to less than 1/5.

[Experiment in Combination with Ice Pack Compact]

A PET bottle filled with room temperature water at 30°C was prepared.

This product was placed in a room at 20°C with a Sub-Zero Pack Compact (sold separately) and the bottle mentioned above.



After 60 minutes, the temperature dropped from 30°C to 27.2°C.

*Using the Sub-Zero Pack also raises the bottom of the bottle, so it can be used with short bottles of 14.5-17.5cm.


[Heat Retention Experiment]



A PET bottle filled with 70°C hot water was placed in this product and put in the refrigerator.



After 60 minutes, even in the cold of the refrigerator, the temperature remained warm, dropping from 70°C to 60.5°C.


■Easy-to-carry handle

The handle makes it convenient to carry.

Made of silicone, it is soft and fits comfortably in your fingers. The handle is movable, so it doesn't get in the way when drinking.


■No condensation concerns

Due to its vacuum structure, this product hardly condenses.

Therefore, there is no need to worry about it getting wet from condensation, even on a table or in your bag.

Suitable for everyday use, as well as business settings and outdoor activities.

Total weight: (approx.) 450g

Size: (approx.) 10.7cm (width) x 10.5cm (depth) x 16cm (height)

Body diameter: (approx.) 8.7cm

Compatible bottle capacity: (approx.) 370ml-670ml

(When using the Sub-Zero Pack Compact) 300ml-670ml

Compatible bottle size: Maximum diameter approx. 7.2cm, height approx. 17.5-25.0cm

(When using the Sub-Zero Pack Compact) height 14.5-22.0cm

Cooling effect: 8℃ → (1 hour) → 10.7℃ or lower

Heat retention effect: 55℃ → (1 hour) → 48.1℃ or higher

Composition: Main body, silicone mat

Main materials: Stainless steel, PP, TPR

Performance/Features:

・Excellent cooling and heat retention thanks to overall vacuum insulation! Compatible with 660ml large-size bottles and canned bottles.

* A vacuum bottle case that keeps PET bottles and cans cool or warm.

* The entire bottle is vacuum-sealed for superior cooling and warming power.

* Keeps drinks cold and warm for a long time.

* Compatible with many PET bottles and bottle cans from 300ml to 670ml.

* Also compatible with bottle cans sold at convenience stores.

* Allows for extended cooling and extended coldness of beverages when using the Sub-Zero Pack Compact (sold separately).

* Allows the use of short bottles from 14.5 to 17.5cm by raising the bottom with the Sub-Zero Pack Compact (sold separately).

* Features a rotating handle for easy carrying.

* Depending on the bottle shape, some bottles may not be usable even within the compatible capacity and size range.

* Insulation performance varies greatly depending on the outside temperature, the amount of beverage inside, and the temperature at the time of insertion.

*The cooling (heating) efficiency refers to the temperature when the product is filled with approximately 8°C cold water (approximately 55°C hot water) in a 500ml PET bottle and left for a specified time at a room temperature of approximately 20°C.
*When using short bottles of approximately 14.5cm to 17.5cm in length and with a capacity of 300 to 370ml, use in conjunction with the Ice Pack Compact is mandatory.
*Depending on the shape of the PET bottle, the handle may interfere with the bottle.
*Please twist the cover to attach it securely. However, be careful not to overtighten the cover.