AMERICAN DJ / AX2

The AX2 is ADJ’s first fully integrated lighting controller built on the ONYX platform. It features a Full HD touchscreen, encoders, and playbacks, with fast performance powered by a hexa‑core CPU. Supporting 32 universes and multiple protocols, it also allows expansion with a 4K touch monitor.

■ Key Features
- Equipped with ONYX by Obsidian Control Systems
- DYLOS media engine with 5-zone support
- Adjustable 15.6-inch Full HD multi-touch screen
- Supports two external 4K touch displays
- Integrated processing for 32 universes
- Ten playbacks
- Eight encoders
- SMPTE / MIDI support
- Keypad and built-in 3.5-inch touchscreen
- Supports network, DMX, timecode, and MIDI

■ Control Section
- Ten 60mm playback faders (each with four assignable buttons)
- Eight customizable multi-function keys
- Playback select buttons
- Master Go section with Go, Pause, Snap, Release
- Four digital rotary encoders with push function and status LEDs
- Four rotary encoders beside the screen (with push function)
- 3.5-inch RGB touchscreen for parameters, effects, fanning, timing
- Grand master fader, Blind, Highlight, Last, Next buttons
- Numeric keypad and command keys

■ Hardware
- 15.6-inch TFT touchscreen (1920x1080)
- 500GB NVMe M.2 storage
- Intel i5 hexa-core CPU
- Silent heat-pipe cooling design
- 16GB DDR4 RAM
- Integrated graphics
- Windows 11 IoT Embedded
- OS installation via USB 3.0 device
- Windows USB touchscreen support

■ Connectivity
- DMX / RDM: 5-pin XLR x4
- External displays: DisplayPort x2 (4K supported)
- Network: Gigabit x2 (Art-Net, sACN, ONYX X-Net)
- USB: USB 3.0 x4, USB 2.0 x1
- Audio out / mic in: 3.5mm jack
- MIDI In/Out/Thru: 5-pin DIN
- SMPTE timecode In/Out: 3-pin XLR
- Power input: 12V DC (4-pin XLR)
- Desk lamp: XLR 12V

■ Dimensions
- Length: 300mm
- Width: 540mm
- Height: 121mm
- Weight: 9kg

■ Power
- AC 100-240V (50/60Hz) to 12V DC adapter included
- Maximum input current: 3A
- 12V DC output: 11A (maximum 132W)

■ Included Accessories
- RGB LED desk lamp
- Dust cover
- USB cable
- Power adapter (12V 11A)
- 1.5m power cable (3-pin IEC)
- USB recovery flash drive

Specifications are subject to change without notice.