IMAGENICS / CRO-UIL2HTX

<> IMG.LINK signal transmitter HDMI transmitter. Compatible with IMG.LINK Rev2 standard, it supports 4K@60 444 color video transmission via HDMI 2.0/HDCP 2.2.

■4K Video Compatible HDMI Signal Coaxial Extender/Transmitter
■Input Signal Section
Input Digital Video Signal (HDMI (DVI) INPUT)
TMDS Signal (Digital RGB, YPbPr (444, 422, 420))
1 HDMI-A Connector (HDCP 1.4, 2.2 Compatible, DVI Signal Input Possible)
HDMI 2.0 Standard Compliant Signal (Includes Up to 8 Channels of Embedded Audio) or 24-Bit Full Color DVI Rev 1.0 Standard Compliant Signal
Pixel Clock: 25 MHz to 600 MHz, Horizontal Frequency: 15 kHz to 200 kHz, Vertical Frequency: 23 Hz to 240 Hz
Image Signal with 320 to 4096 Horizontal Active Pixels and 240 to 2160 Vertical Active Lines Automatically supports video signals.
(Automatically supports D1-D5 (FHD equivalent), 4K HDMI signals, and common PC resolution signals from 320x240@60 to 4096x2160@60.)
■Output Signal Section
Output digital serial video signal (IMG.LINK OUT-1, OUT-2)
1 digital serial signal using original re-encoding method, 1.0Vp-p, 75Ω, 2-way distribution, BNC x 2
Video bitrate after original re-encoding is approximately 2.5Gbps NRZI signal (constant bit rate, audio is 9.216Mbps)
Original bidirectional communication link function, IMG.LINK Rev2 standard (VC-2HQ video compression)
*Only IMG.LINK Rev2 signals can be output. Conventional IMG.LINK Rev1 signals cannot be output.
Please use an IMG.LINK Rev2-compatible device for the IMG.LINK receiver.
IMG.LINKRev2 signals can be used with all conventional distributors and ILS series switchers.
■Analog Audio Signal: