MOOER / PURER OCTAVE

Mooer has long been recognized by musicians worldwide for its cutting-edge guitar pedals, and the Mooer PURER OCTAVE is no exception. Featuring cutting-edge re-pitching algorithms, a minimalist, sophisticated design, and features that go beyond your typical octave pedal.

The PURER OCTAVE features 15 polyphonic octave modes and one detune effect. The DSP algorithm separates the high and low frequencies, allowing for seamless timbre across the entire frequency range. The two frequency bands are controlled by independent SUB and UPPER knobs.

Presets can also be saved using the center toggle switch.

●Features
・Accurate, distortion-free polyphonic octave effects
・15 octave modes and detune effects
・3 operating modes (2 presets and manual mode)
・Independent control of SUB and UPPER
・Switchable bypass signal blend

●Controls
・SUB: Adjusts the signal level below the octave. In DT mode, adjusts the volume of the sub part.
・UPPER: Adjusts the signal level above the octave. In DT mode, adjusts the volume of the upper part.
・OCTAVE MODE: Select the desired mode from 15 octave modes and DT (DETUNE) mode.

- 3-Mode Switch: Switches between three operating modes. PANEL mode is a manual control where each setting corresponds to the knob position. FAV A and FAV B are preset modes that allow you to recall previously saved sounds.
*If you edit the settings for FAV A or FAV B, be sure to save them before turning off the power. Turning off the power before saving will cause the edits to be lost.

●Specifications
INPUT: 1/4"" mono audio jack (impedance value 470k Ohms)
OUTPUT: 1/4"" mono audio jack (impedance value 100 Ohms)
Power supply: 9V DC (center negative)
Current draw: 120mA
Dimensions: 93.5mm (D) x 42mm (W) x 52mm (H)
Weight: 157g
Accessories: Owner's manual.