Headphones / Earphones
HEADPHONE
Headsets
AKG/HSC271 CHH20 Headphone Hanger Set

AKG / HSC271 CHH20 Headphone Hanger Set

Variations

A great value set that includes the professional headset "HSC271" and headphone hanger "CLASSIC PRO/CHH20"!

- The AKG HSC271 is a high-end professional headset microphone equipped with a condenser microphone. It's ideal for broadcasters, especially those recording television programs. Cable sold separately.

- Features a mute switch that automatically mutes the headphone output when the headphones are removed.
- The microphone is equipped with a shock mount to reduce mechanical noise.
- The mute function is automatically activated when the boom mount is raised, eliminating unwanted sound pickup.
- By rotating the boom to the other side, the microphone can be positioned on either the left or right side.
- The microphone's low-cut filter can be adjusted via the preamp's internal circuit board.
- Cable sold separately.

◇Microphone Section
・Type: Condenser
・Polar Pattern: Cardioid
・Frequency Response: 20Hz–20kHz
・Open-Circuit Sensitivity: -32dB re 1V/Pa
・Maximum Sound Pressure Level: 126dB SPL (1% THD)
・Equivalent Noise Level: 22dB SPL (A-weighted)
・Impedance: 200Ω or less
・Power Supply: Phantom Power: DC 9–52V/2mA or less

◇Headphone Section
・Type: Closed dynamic
・Sensitivity (1kHz): 94dB SPL/mW
・Frequency Range: 16Hz–28kHz
・Maximum Input Power: 200mW
・Impedance: 55Ω
・Ear Pads: Around-ear type, synthetic leather

◇Other
・Accessories: Ear pads (velour), windscreen (W44)

＜CHH20＞
・CLASSIC The PRO/CHH20 is a clamp-type headphone hanger that can hold two pairs of headphones. It can be placed horizontally or vertically relative to the ground, making it suitable for a variety of locations, including at home and in the studio.

- The two-pronged hanger allows you to hang up to two pairs of headphones.

- The foldable hanger keeps it out of the way while you work.

- The hanger's base is detachable, allowing it to be placed horizontally or vertically relative to the ground, such as on the edge of a table or desk leg.

- The clamp section can accommodate headphones up to 40mm thick.

- Weight: Approximately 150g

- Clamp width: Up to 40mm