This is a bundled product that includes the ""AKG/LYRA"" and ""CLASSIC PRO/CDA5B"".
[LYRA]
■USB microphone
■Frequency Response: 20Hz - 20kHz
■Bit Depth/Sample Rate: 24-bit/192kHz
■Maximum SPL: 129dBSPL (0.5% THD)
■Power Consumption: 5V USB / 75mA
■Headphone Impedance: 16 ohms
■Headphone Output (RMS): 43mW
■Headphone THD: <0.009%
■Headphone Frequency Response: 20Hz - 22kHz
■Headphone Signal-to-Noise Ratio: 98.0dB
■Dimensions: H247.5 x W107.90 x L152.50mm
■Thread Diameter: 5/8"", 3/8 *Compatible with standard microphone stands
■Accessories
■USB Cable (2m) x 1 (USB Type-C to USB Type-A)
■Registration card for Ableton Live 10 Lite x1
■Quick Start Guide x1
■System Requirements
・WindowsR8 or later
・MacOSR10.7 or later
・ Android 9 or later with an OTG-compatible device
・iOS10 or later
※ *When connecting to the Lightning port of an iPhone or iPad, a genuine Apple Lightning USB-3 cable is required.
The microphone must receive power to be recognized in this connection setup.
For iPad use, choose a power adapter rated for at least 2.5 A; an adapter with a lower rating may not provide reliable operation.
Headphone monitoring remains available while connected through the camera adapter.
※ *When connecting to a USB Type-C port, a hub and cable supporting DC5V power are required.
※ *When using with Android, audio may not be heard from the headphone monitor. Try turning the MUTE switch on the microphone on and off to hear audio again.
[CDA5B]
■Desk Arm
■Tabletop Microphone Stand
■Arm: 30cm + 30cm
■Clamp compatible width: Up to approximately 35mm
■Thread diameter: 3/8 (Shure) inch
■Includes 5/8-inch adapter screw (attached to the microphone holder)
※ *The combined weight of the microphone, shock mount, and pop filter must not exceed 1kg.
関連商品
商品レビューProduct Review
すべてのレビューを見る