AJH Synth / Multi Burst Envelopes black

The MiniMod Multi Burst Envelopes module generates repeated variable-length burst envelopes that change over time, while controlling all functions via CV.

The BURSTS control selects a “burst sequence” consisting of 1 to 40 envelopes. The envelope shape for each burst can be selected via the rotary switch or varied using external CV.

The envelope width (attack & decay time) can be varied using the P-WIDTH control and can also be CV-controlled in sync with the sequence progression.

The repeat time for each burst within the burst sequence is set by the LFO Rate control. The LFO rate can be varied by external CV as the sequence progresses, causing the gaps between envelopes to speed up or slow down over time. Additionally, the timing of the burst sequence can be synchronized to an external clock, either instead of or in addition to the internal LFO. You can also manually increase bursts using the CLK push button.

The SLOPE control allows bursts to start quietly and rise to maximum level, or start at full level and decrease as the burst sequence progresses. At the center position, all bursts will have the same level.

■Specifications
・8 selectable burst waveforms: Sine, Log Decay, Log Amplify, Exponential Decay, Ramp, Triangle, Sawtooth, Pulse
・Built-in LFO for adjustable burst rate
・Pulse width control to govern attack/decay time
・Slope control to set the increase/decrease of burst signal level
・One-shot/retrigger mode
・Trigger button/clock button
・CV input jacks for all parameters
・Trigger input jack/clock input jack
・Gate output jack/burst output jack
・Current consumption: 28mA (+12V)/12mA (-12V)
・Width: 12HP
・Depth: 26mm