ATOMOS / SHINOBI GO

SHINOBI GO is a camera monitor that is powered by an ATOMOS battery or USB-C and supports HDMI input.

■Camera Monitor
[Housing]
■Size/Weight: 151 x 91.5 x 20.8 (mm) / 210g
■Mounting Screw Holes: Top: None; Bottom: One 1/4-20 anti-rotation screw hole
[Usage Environment]
■Ambient Operating Temperature: 0-40°C (No condensation)

[Construction]
■Housing Material: ABS Plastic
■Cooling: Natural cooling (fanless)
■Power Button: Main power on/off and screen lock on/off

[Power Supply]
■Compatible Input Voltage: DC 6.2-16.8V
■Power Consumption: 10W
■Compatible Battery: ATOMOS NPF L Series *When using a PD input, power is supplied from the PD input. With these power sources, power cannot be selected and power is drawn from the higher voltage.
■Battery Charging: Not supported *Please use the optional ATOMOS charger.
■Built-in battery: Not included
■DC input: Optional battery eliminator and AC adapter can be used
■D-Tap: Connect the optional battery eliminator and D-tap to DC cable
■USB PD input: Third-party USB PD charger with 20W or more (via the included USB-C cable) *The battery cannot be charged with the product itself; please use the optional ATOMOS charger.
■USB PD output: Maximum 13W *Cannot be used simultaneously with PD input.
[Monitor]
■Touchscreen: SuperAtom IPS panel (capacitive touch)
■Screen size: 5.2 inches
■Screen resolution: 1920 x 1080
■PPI: 427
■Color depth: 10-bit (8+2 FRC)
■Backlight: Edge lit
■Maximum brightness: 1500nit
■Aspect ratio: 1:9
■Color temperature: D65 *Changes to other settings such as D93 and fine-tuning of the color temperature are not supported.
■Color Gamut: Rec. 709
■Calibration Support: Compatible with Atomos calibrators (requires an Atomos USB serial cable and Calibrite ColorChecker Display Pro/ColorChecker Display Plus or Xrite i1 Display Pro/Plus, sold separately)

[Color Pipeline]
■Gamma: Sony S-Log/S-Log2/S-Log3, Canon C-Log/C-Log2/C-Log3, Panasonic V-LOG, JVC J-Log1, Fujifilm F-Log/F-Log2, Nikon N-LOG/HLG, Olympus OM-LOG400/FLAT, OM-System OM-LOG400/FLAT, Leica L-LOG
■Gamut: BT2020, DCI P3, DCI P3 65, Sony SGamut/SGamut3/SGamut3.cine, Canon Cinema/DCI P3/DCI P3+/BT.2020, Panasonic V Gamut, JVC LS300
■3DLUT Display: .Cube format
■3DLUT 50/50: Supported
■Monitoring Mode: SDR Native, HDR HLG, HDR PQ, 709 LUT, User LUT
■Display Settings: Brightness, Lift, Gamma, Gain
■AtomHDR Technology: Supported
【Video Input】
■HDMI Input: 1 x HDMI (1.4) Supports up to 4K30p
■Video Chroma Subsampling: 4:2:2, 4:2:0
■Color Depth: 8/10-bit
■HDCP Copy Protection: Not supported
【Audio Input/Output】
■HDMI: 2-channel 24-bit (dependent on input signal)
■Headphone Output: 3.5mm x 2
■Built-in Speaker: Not supported
【Timecode】
■HDMI Overlay Data Support: Display only
[Supported Formats (Video Input)]
■4K DCI: Not supported
■4K UHD: 23.98/24/25/29.97/30p
■FHD 1920x1080 Progressive: 23.98/24/25/29.97/30/50/59.94/60p
■FHD 1920x1080 Interlaced: 1080i50/1080i60
■1280x720p: 50/59.94/60p
[SD Card Slot]
■UHS-1 Full-Size SD Card: Used for loading LUTs and updating AtomOS
■File Format: FAT32, NTFS
[On-Screen Tools]
■Image Analysis Multi-Screen: Image, Waveform Selection, Vectorscope, Histogram
■Waveform: Supported, 3 sizes, adjustable transparency and brightness

■Histogram: Supported * 3 sizes, adjustable transparency and brightness

■RGB Parade: Supported * 3 sizes, adjustable transparency and brightness

■Vectorscope: Supported * 2 sizes, adjustable transparency and brightness

■1x Zoom: Supported

■2x Zoom: Supported

■4x Zoom: Supported * Up to HD60p

■Focus Peaking: 4 modes with selectable color/border widths: Color, Monochrome, Outline, and Edge Sharpening

■ATOMOS False Color: Supported * Scale display

■Arri False Color: Not supported

■EL Zone: Not supported

■Zebra: Supported * Configurable threshold (50-105%)

■Isolate Color Channel: Blue only

■Cine Frame Guide: 2.41, 2.35, 1.91, 1.9 1.85, 16:9
■Social Frame Guide: 9:16, 4:5, 2:3, 1:1, 5:4, 4:3, 3:2
■Safety Area: Supported *SMPTE Safe Title Area - 93% & 90%
■9 Grid Markers: Supported
■Anamorphic Desqueeze: Not supported
■Display Flip: Vertical and Horizontal Selfie Mode
[Connections]
■Serial 2.5mm Port: Calibration possible with optional (sold separately) USB-serial cable and calibrator
■USB-C Port x 1: USB-C for powering SHINOBI GO *Camera control/touch focus is not supported.
[Peripherals]
■ Included Items: SHINOBI GO unit, USB-C to USB-C 2.0 cable (approx. 0.9m), HDMI + USB-C locking cable adapter, QuickStart Guide (English version)
■ Optional Accessories: ATOMOS HDMI cable, USB-serial calibration cable (model number: ATOMCAB018)