myFirst / myFirst 3dPen Make Blue

myFirst 3dPen Make is a fast-setting, wirelessly operated 3D pen designed to bring joy to your child's learning process.

■Draw 3D objects!
- Low-temperature heated plastic is extruded from the pen tip and rapidly cooled to create solid, 3D objects. Any shape can be created, limited only by your imagination and ingenuity. You can draw motifs in the air or trace lines on paper to create parts and then combine them to create a 3D object.

■Just wait 30 seconds! Easy to use!
- It takes only 30 seconds from pressing the heating button to the point where the pen is ready to dispense. Then, simply select the speed and press the dispense button while drawing, making it easy even for children to use.
*Filament is included with the pen, so no separate purchase is necessary.

■Heat dissipation design means no risk of burns!
- The pen has a heat vent, so the pen itself does not heat up even when heated. The dispensed filament is also low-temperature, at approximately 30°C, so it is safe to touch immediately.

■Environmentally friendly, with no hazardous substances!
- The filament is made of PCL low-temperature material, which produces no odors or harmful substances.

■Drawing Tips
-Making the Base
This product comes with a shape template. By attaching the filament to a template or object, you can draw freely in the air.

Using gravity
Filament softens when heated and hardens again when cooled. When drawing three-dimensional objects, adjust the angle and let the filament hang naturally for a clean finish.

■Body Color: Blue
■Building Speed: Two adjustable levels
■Temperature: Two adjustable levels
■Power Supply: Built-in rechargeable battery or adapter with 5V, 1A, or 2A output.
Nozzle Diameter: 0.9mm
Filament Diameter: 1.75mm
Device Dimensions: 142x29x26mm
Net Device Weight: 46g
Package Contents
- myFirst 3D Pen Make x 1
- USB Charging Cable x 1
- 9 Filament Colors (Red, Yellow, Light Green, Light Blue, Blue, Green, Beige, Purple, Black)
- Manual & Shape Template Sheet

* Recommended for ages 7 and up
* Depending on the production lot, the charging connector will be either Micro USB Type-B or Type-C. The connector type cannot be specified.
* Not compatible with fast charging.