IMAGENICS / MIX-SD4

This 4-screen multi-viewer can combine up to 4 video signals into a single screen. The layout can be freely set to any size and layout, and up to 8 patterns can be assigned to the front keys, allowing for completely seamless switching.

■SDI-Compatible Multi-Scan Converter
■SDI Input Signal

SMPTE-compliant D1 serial signal (SMPTE259M-C 270 Mbps NRZI)

or HD serial signal (SMPTE292M 1.485 Gbps NRZI)

or 3G serial signal A or B format (SMPTE424M 2.97 Gbps NRZI)

0.8Vp-p 75Ω 4 lines BNC x 4
■Active Through Output Signal

Reclocked active through output in the same format as the input signal

0.8Vp-p 75Ω 4 lines BNC x 4
■Supported Input Signal Formats

480i@59.94 Hz, 575i@50 Hz

1080i-based vertical frequencies of 48 (sF), 50, 60 Hz and 1/1.001 times these frequencies, 1080p-based vertical frequencies 24, 25, 30, 50, 60 Hz and 1/1.001 times these frequencies. 720p vertical frequencies: 24, 25, 30, 50, 60 Hz and 1/1.001 times these frequencies.
■SDI Output Signal:
SMPTE-compliant D1 serial signal (SMPTE259M-C 270 Mbps NRZI)
or HD serial signal (SMPTE292M 1.485 Gbps NRZI)
or 3G serial signal type A (SMPTE424M 2.97 Gbps NRZI)
0.8 Vp-p 75 Ω 1 system 2 distribution BNC x 2
Supported Output Signal Formats
■480i@59.94 Hz, 720p@59.94, 1080i@59.94 Hz, 1080p@59.94 Hz
■Genlock Function
Genlock Reference Input:
High-impedance loop-through, sync level 0.25Vp-p to 1.0Vp-p, 1 BNC x 2
Genlock Signal Format:
NTSC B.B, 1080i, 720p bi-level or tri-level sync (only supports vertical frequency 59.94Hz)
Genlock Adjustment Range:
Adjustable in pixel increments up to ±16 lines of the output SDI signal
■Input/Output Video Quantization:
Digital YPbPr signal, 10 bits each (some pseudo-10 sigma is used with optional units other than the standard IN-SD2 input) (This is a 1-bit specification.)
■ Video Absolute Delay:
33 ms to 67 ms (equivalent to 3 frames (fields) -1, +1 field of output video)
■ Analog Audio Input/Output Function
(Inputs per input, including embedding and de-embedding)

Audio Input Terminal: -10 dBu High Impedance Unbalanced 2-Channel 1-System RCA Pin Jack x 2
Audio Output Terminal: -10 dBu (10 kΩ or greater load) Low Impedance Unbalanced 2-Channel 1-System RCA Pin Jack x 2
Audio Frequency Response: -1 dB to +1 dB from 20 Hz to 20 kHz
Audio S/N Ratio: 85 dB or greater (1 kHz A-weighted, reference -10 dBu output)
Audio Crosstalk: 80 dB or greater
Audio Distortion: 0.03% or less (10 kΩ or greater load)
Maximum Audio Input Level : +10dBu (including SDI embedded audio output at 0dBFS)
Maximum audio output level: +10dBu (including SDI embedded audio input at 0dBFS)
Audio sampling frequency:
24-bit 48kHz linear PCM (for both analog and embedded outputs)
Absolute audio delay: Approximately 50ms (fixed for both analog and embedded outputs)
■Memory function:
Automatically stores and plays back 64 sets of input resolution-specific setting information for each input number, automatically stores and plays back operating status, and stores and plays back user-specified settings (128 types controllable via external control only).
Backup life when powered off is semi-permanent.
■External control function
Serial communication:
RS-232C compliant D-SUB9 (male) x 1, 9,600, 19,200, 38,400 bits/s switchable.
Parallel Contact:
Contact Control: Amphenol 50-pin (female) x 1
■Other Additional Features:
■Horizontal/Vertical Aspect Ratio (Automatic/Customizable)
■90-degree Image Rotation for Each Input Number, High-Precision Custom Zoom
■Luminance/Linear Key Compositing
■Transparency Settings for Each Window
■Bordered Display for Each Window
■Custom On-Screen Display for Each Input Number (16 Characters, 2 Lines, Alphanumeric Characters and Some Symbols)
■Fully Seamless Switching (Cut, Mix, Wipe (Including Simple Digital Effects))
■Pseudo-Seamless Switching (Fade Type) for External Switchers
■Analog Audio Embedding/De-Embedding, Custom Audio Level Mixing, and Linked Switcher Selection
■Fan Alarm Notification
and More
■Power Supply: AC90V to AC250V (50Hz/60Hz)
■Power Consumption: 40W (Maximum for Standard Configuration)
■Weight: Approx. 5.2 kg (standard configuration)
■ SIZE: 422 (W) x 44 (H) mm x 300 (D) mm
*Not including protrusions
■ Accessories
EIA 19-inch rack mount brackets (1 set)
Japan-specific locking power cable (3P-3SL) (1)
3P-2P power adapter plug (1)
Switch cover (1)
*Note) We recommend using only Imagenics products for DVI/HDMI-related devices and cables. Mixing products from other companies (including overseas manufacturers) may result in performance issues and unexpected malfunctions. In such cases, we cannot guarantee the operation of Imagenics products.

Specifications and appearance may be changed without notice for product improvement purposes.