IMAGENICS / MIX-DV4

This is a 4-screen multi-viewer that can combine up to 4 video signals into a single screen.

■Digital Multi-Scan Converter (HDCP-Compatible 4-Screen Multi-Viewer)
■Input DVI-D Digital RGB Signal
TMDS Signal (Digital RGB 24-bit Full Color Signal or HDMI-Based YPbPr 4:4:4, YPbPr 4:2:2 Signal)
DVI Rev 1.0 Compliant DVI-D 24-Pin Connector (Single Link) x 1
Pixel Clock 25 MHz to 165 MHz
(VGA@60 to UXGA@60, WUXGA@60RB, and HDMI-Compatible Signals Equivalent to D1 to D5)
(HDCP Compatible, Up to 4 Inputs per Input with Standard IN-DV Unit)
*Input units can be installed using the IN-BNC (Standard Analog Input) and IN-SDI (Serial Digital Input) units for the MIX-VT4.
However, input/output resolution, etc., are limited to the MIX-VT4 specifications.
■ Input EDID Emulation:
The main unit menu allows you to specify 1920 x 1200@60RB/HDMI (factory default) or any major resolution from VGA to UXGA, including widescreen resolutions.
You can also specify HDMI-compatible video equivalent to 720 x 480p (D2), 1280 x 720p (D4), or 1920 x 1080i/p (D3, D5) that conforms to the CEA-861D standard.
■ Output DVI-D digital RGB signal
TMDS signal (digital RGB 24-bit full-color signal, switchable to HDMI-based YPBPR 4:4:4 or YPbPr 4:2:2 signals)
DVI Rev 1.0 compliant DVI-D 24-pin connector (single link) 2 systems
■Output resolution
720x480 (CEA-861D, D2 equivalent) 640x480800x6001, 024x7681, 280x720 (CEA-861D, D4 equivalent)
1,280x7681,280x8001,360x7681,366x7681,440x9001,280x9601,280x1,024
1,400x1,0501,680x1,050 1,600x900, 1,600x1,200, 1,920x1,080i/p (equivalent to CEA-861D, D3, D5)
1,920x1,200 (Reduced Blanking), 2,048x1,080, 2,048x1,152 (Reduced Blanking)
(Select one of the above resolutions; all vertical rates are 59.94Hz) * The output resolution cannot be selected for each output channel. The same resolution will be used.
* RGB, YPBPR 4:4:4, or 4:2:2 color can be selected for each output channel.
* A function is available to automatically recognize and select HDMI-compatible signals (with audio) and DVI signals for each output channel.
* The feed cable compensation function can be set separately for the two channels.
Depending on the receiver's DVI signal input performance, transmission distances up to approximately 15m are possible using an AWG #28 equivalent DVI cable.
(Measured by Imagenics using UXGA video)
■Video Quantization
Digital RGB (YPbPr) signal: 8 bits each
*10 bits each for 4:2:2 input/output via HDMI and SDI signals
■Video Absolute Delay:
33ms to 67ms (equivalent to 3 frames (fields) -1, +1 field of output video)

[Analog Audio Input/Output Function]
(Including embedded and de-embedded operation, input per input)
■Audio Input Terminal:
-10dBu, approximately 50kΩ, unbalanced, 2 channels x 1
(Two RCA pin jacks or one φ3.5 stereo jack, etc.) (Only one of these can be connected.)
■Audio Output Terminal:
-10dBu (10kΩ or greater load) low impedance unbalanced 2-channel x 2
(Two RCA pin jacks and one φ3.5 stereo jack can be used simultaneously)
■Audio Frequency Response:
-1dB to +1dB from 20Hz to 20kHz
■Audio S/N Ratio:
85dB or greater (A-weighted at 1kHz, reference -10dBu output)
■Audio Crosstalk: 80dB or greater
■Audio Distortion: 0.03% or less (10kΩ or greater load)
■Maximum Audio Input Level : 10dBu (including 0dBFS HDMI embedded audio output)
■Maximum audio output level: +10dBu (including 0dBFS HDMI embedded audio input)
■Audio sampling frequency
Audio input: 24-bit 32kHz-96kHz linear PCM (fixed at 24-bit 48kHz for analog input only)
Audio output: 24-bit 48kHz linear PCM (for both analog and embedded output)
■Absolute audio delay: Approximately 65ms (fixed for both analog and embedded output)

[Other additional features]
■Other additional features:
■Horizontal/vertical aspect ratio (automatic/custom)
■90 by input number Degree image rotation function (※)
■ Various image quality process adjustments
■ Various noise reduction functions
■ High-precision, custom-position zoom (supports both outer and inner zoom)
■ Luminance and linear key compositing function
■ Window transparency settings
■ Window trimming function
■ Window border display
■ On-screen adjustment screen display
■ Custom on-screen display for each input number
(16 characters, 2 lines, alphanumeric characters, some symbols, etc.)
■ Adaptive frame overtaking processing
■ Fully seamless switching
(Cut, Mix, Wipe (including simple digital effects))
■ Pseudo-seamless switching processing (fade type) compatible with external switchers
■ Built-in test pattern signal output
(Composite pattern, zebra video, 1kHz audio)
■ 3-bit test for interlaced input signals Dimensional motion adaptive progressive conversion processing
(Enhanced diagonal interpolation, film-style pull-down supported)
■Analog audio embedding/de-embedding function
■Custom audio level mixing and linked switcher selection function
■FAN alarm notification function
And more. *Using the 90-degree image rotation function may result in some performance and functionality limitations. Also, not all on-screen displays can be rotated. Please refer to the instruction manual for details.
■External Control Functions:
RS-232C (Connector: D-sub 9-pin male), Parallel (Connector: Amphenol 50-pin female)
■Power Supply: AC 90V to AC 250V (50Hz/60Hz)
■Power Consumption: 40W (maximum for standard configuration)
■Weight: Approximately 5.2 kg
■Operating Temperature and Humidity Range:
0°C to 40°C
20%RH to 90%RH (non-condensing)
■Storage Temperature and Humidity Range:
-20°C to 70°C
20%RH to 90%RH (non-condensing)
■Dimensions: 422(W) x 44(H) x 300(D) mm (excluding protrusions)
■Accessories:
1 x Locking Power Cable (3P-3SL) for Japan Use
1 x 3P-2P Power Conversion Plug
1 x Power Switch Cover 1 unit
EIA19-type rack mount brackets: 1 set
*Please note: We recommend using only IMAGNIX products for DVI/HDMI-related devices and cables. Mixing IMAGNIX products with other companies' (including overseas) products may result in performance issues and unexpected malfunctions. In such cases, we cannot guarantee the operation of IMAGNIX products.
Please note that specifications and appearance may be changed without notice for product improvement purposes.