IMAGENICS / DM-C4K

A plug-and-play emulator that supports 4K resolution HDMI signals.

■HDMI Plug and Play Emulator
■4K Signal Format
TMDS Clock: 25MHz to 340MHz
Pixel Clock: 25MHz to 600MHz
Data Rate: 0.75 to 18Gbps
HDCP: 1.4/2.2
Supported Resolutions: 4K60p4:4 (24-bit), 4K60p4:2 (236-bit), 4K30p4:4 (36-bit), etc.
■Video Signal Format
TMDS Single Link Signal (HDMI and DVI)
Supported Resolutions: 480i to 1080p, 4K (@60/4:4:4) / VGA to UXGA and WUXGA (Reduced Blanking)
HDCP 1.4/2.2 Supported
(HDCP Through and Cut Functions Included. *HDCP-protected content cannot be viewed if HDCP is cut.)
HDR Supported, Deep Color Supported, CEC Through Supported
■Input/Output Connectors:
HDMI Type A 19-pin receptacle connector
■EDID mode setting:
You can select the following maximum resolution EDID presets:

3,840 x 2, 160@60/4:4:4, 3,840 x 2, 160@60/HDR, 3,840 x 2, 160@60/4:2:0, 3,840 x 2, 160@30,
4,096 x 2, 160@60/4:4:4, 4,096 x 2, 160@60/HDR, 4,096 x 2, 160@60/4:2:0, 4,096 x 2, 160@24,
1,920 x 1,080p, etc.

You can also read and store the EDID of a monitor or other device connected to the unit's HDMI output terminal and use that data.

(Each preset The timing of the video data complies with the CEA-861 and VESADMT standards.)
■ Cable Compensation Distance:
3,840 x 2,160@60/4:4:4/24bits Input: 10m Output: 5m
3,840 x 2,160@60/4:2:0/24bits Input: 20m Output: 5m
1,920 x 1,080p/24bits Input: 30m Output: 10m
*These are approximate values ​​measured in Imagenics' in-house environment, and cable lengths are not guaranteed in all environments.
*A high-speed HDMI cable with 18Gbps transmission speed is required to watch 4K@60P/4:4:4.
■ Power Supply: DC5V 0.3
■Power Consumption: 1.5W (Maximum)
■Weight: Approx. 150g
■Size: 70(W) x 23(H) x 65(D) mm (excluding protrusions)
■Accessories:
AC 100V 27VA 50Hz/60Hz (Japan-use only) AC Adapter (5V 2.3A output with locking mechanism) x 1,
HDMI Connector Locking Brackets (CL-1) x 2,
HDMI Cable (High Speed ​​HDMI Cable with Ethernet) 1m x 1