IMAGENICS / RS-1530A

DVI/HDMI frame synchronizer that supports multiple video/RGB/YPbPr signals.

■RGB Input - DVI Output Frame Synchronizer (Maximum Output Resolution: 2048 x 1080)
■Video Signal Format:
Analog RGB signal for PC/WS or component signal (Y, Pb, Pr) (Y, Cb, Cr) or composite signal (NTSC, PAL)
Note: Input signal is automatically tracked. (Fully automatic detection supported)
■Analog Video Input (Fully automatic detection)
RGB and Sync:
Analog RGB signal 0.7V (p-p) 75Ω, 1 each (Mini Dsub15)
Note: Sync On Green: 1.0V (p-p), 75Ω
HD (CS), VD: TTL level, positive and negative polarity, 2.2kΩ, 1 each (Mini Dsub15)
Input Resolution Range: 320 x 200 to 2,048 x 1,536 pixels
Note: Continuous tracking from 15kHz to 135kHz horizontally and 22Hz to 160Hz vertically
Composite: 1.0V (p-p), 75Ω, 1 (Mini Dsub15)
Note: NTSC, PAL compliant, standard and non-standard signals
Composite Components:
Y: 1.0V(p-p) 75Ω Pb(Cb), Pr(Cr): 0.7V(p-p) 75Ω (1 each) (Mini Dsub15)
Supported Standards: 1080i (1125i), 720p (750p), 480 (525)i/P
Note: Video signals equivalent to D1 to D4 terminals
■Input EDID (DDC communication) emulation function
Depending on the device menu settings, VGA to 1,920x1, 200@60RB (factory default) and other wide-screen resolutions are supported. You can specify primary resolutions up to UXGA. You can also specify resolutions equivalent to 720x480p (D2), 1,280x720p (D4), and 1,920x1,080i/p (D3, D5) that comply with the CEA-861D standard.
*Depending on the specifications of the video output device (PC, etc.),
the specified resolution may not be displayed.
■DVI Output:
TMDS signal (digital RGB 24-bit full color signal, switchable to HDMI-based YPBPR 4:4:4 or 4:2:2 signal)
Two DVI-D 24-pin connectors (single link) compliant with DVI Rev 1.0
Display Resolution (Select one type): 720x480 (CEA-861D, D2 equivalent), 640x480, 80 0x6001, 024x7681, 280x720 (CEA-861D, D4 equivalent)1, 280x7681, 280x8001, 360x7681, 366x7681, 440 x9001, 280x9601, 280x1, 0241, 400x1, 0501, 680x1, 0501, 600x9001, 600x1, 2001, 920x1, 080i/p (Equivalent to CEA-861D, D3, D5) 1, 920x1, 200 (Reduced Blanking) 2, 048x1, 080 2, 048x1, 152 (Reduced Blanking)
Note: A vertical frequency of 59.94 Hz is used for all output resolutions.
RGB and YPbPr signals cannot be selected separately for each system.
■Cable compensation range: The output cable compensation function can be set separately for two channels.
Depending on the receiver's DVI signal input performance, transmission distances of up to approximately 15 m are possible using a Panasonic DVI cable equivalent to AWG28. (Measured by Imagenics for UXGA video.)
■ Absolute delay time between input and output signals:
Output free-running (normal operation): 33 ms to 67 ms
(Equivalent to 3 fields ±1 field of output signal)
When frame-locked vertically to input video: Approximately 34 ms (fine-tuning of lock phase is not possible)
*Frame lock to input video is only possible when the vertical frequency of the input video is 60 Hz ±1 Hz. Also, with this setting, if the input status changes due to switching input video, the output video will also be affected. This limits the ability of the pseudo-seamless effect to function properly.
■ Analog audio input: -10dBu, 50kΩ unbalanced, 2-channel, 1 system (only one of 2 RCA pin jacks or 1 φ3.5 stereo jack can be connected)
Audio sampling method: 2-channel linear PCM, sampling frequency: 24-bit, 48kHz
■Memory function:
99 types (semi-permanent backup life)
Automatic memory and playback function for each input resolution, automatic memory and playback function for operating status
■Other additional functions:
On-screen menu display
Various high-precision angle of view and size adjustment functions
Arbitrary position cropping and zoom function (up to 400%) (0.1% increments)
Adaptive frame overtaking processing
Various video signal adjustments
Pseudo-seamless functions (fade, wipe, freeze)
Built-in test pattern signal output (composite pattern, zebra video)
3D motion-adaptive progressive conversion processing for television interlaced signal input
(enhanced diagonal line interpolation)
Various noise reduction functions
Output-specific feed cable compensation function (pre-emphasis function), etc.
■Power supply: AC 90 V to AC 250 V (50 Hz/60 Hz)
■Power consumption: 14 W (max)
■Weight: Approx. 2.1 kg
■Operating temperature and humidity range:
0 °C to 40 °C, 20 % RH to 90 % RH (non-condensing)
■Storage temperature and humidity range:
-20 °C to 70 °C, 20 % RH to 90 % RH (non-condensing)
■External dimensions: W 210 mm x H 44 mm x depth 230 mm (excluding protrusions)
■Accessories:
1 power cable with locking mechanism (3P-3SL) for use in Japan
1 3P-2P power adapter plug
1 power switch cover

We recommend using only Imagenics DVI/HDMI-related devices and cables. Mixing Imagenics products with other companies' (including overseas) products may result in performance issues and unexpected malfunctions. In this case, Imagenics product operation may not be guaranteed.
""