IMAGENICS / ILV-U41

This signal converter can combine four 4K IMG.LINK signals and convert them into 4K HDMI and 4K IMG.LINK Rev2 signals for output. [LF] All inputs have built-in 4K-compatible up/down scan converters, and multi-view composition layouts can be freely selected in any size and position, with up to eight types assigned to the front keys.

■ Input Signal Section
IMG.LINK Signal:
4 digital serial signals using the original re-encoding method, 1.0Vp-p, 75Ω, BNC x 4
Video bitrate after original re-encoding: 2.5Gbps NRZI signal (constant bitrate, audio is 9.216Mbps)
Fully automatic support for IMG.LINK Rev1 (uncompressed video) and Rev2 (VC-2HQ video compression)
Video: Pixel clock 25MHz to 600MHz, horizontal frequency 15kHz to 135kHz, vertical frequency 24Hz to 120Hz
VGA to WQXGA (Reduced Blanking), 480p, 720p, 1080i, 1080p, 4K
Audio: 48kHz, 2-channel LPCM
■ Output Signal Section
IMG.LINK Signal:
Original re-encoding 1.0Vp-p 75Ω BNC x 2 digital serial signal distribution using encoding method
Original re-encoded video bitrate: 2.5Gbps NRZI signal (constant bitrate, audio: 9.216Mbps)
IMG.LINKRev2 (VC-2HQ video compression)
HDMI signal:
TMDS clock up to 297MHz, data rate up to 17.8Gbps (1 signal) (HDMI-A x 1)
4K60p (4:4:4) compatible, HDCP 2.2/1.4 compatible
Cable length: HDMI output terminal: 3m (4K60/4:4:4/24bit), 5m (4K60/4:2:0/24bit), 10m (1080p/24bit)
*Values ​​measured in IMAGNIX's internal environment and using IMAGNIX cables. Operation in all environments is not guaranteed.
Video:
Pixel clock: 25MHz to 594MHz (select from the following resolutions; vertical frequency: 59.94Hz or 60Hz)
720x480 (CEA-861F), 640x480, 800x600, 1, 0.24x768, 280x720 (CEA-861F), 280x768, 280x800
1, 360x768, 366x768, 440x900, 280x960, 280x1, 0.24, 400x1, 0.50, 680x1, 0.50, 600x900, 600x1, 200
1, 9 20x1,080P/i (CEA-861F) 1,920x1,200 (Reduced Blanking) 2,048x1,080 2,048x1152 (Reduced Blanking)
2560x1440 (Reduced Blanking) 2560x1600 (Reduced Blanking) 3,840x2,160 (CEA-861F) 4,096x2,160 (CEA-861F)
*Vertical frequencies of 29.97Hz/30Hz can also be selected when selecting FHD or 4K resolution.
Audio: 48kHz 2-channel LPCM
Video/Audio Output:
*Video and audio are distributed via two channels with the same output resolution.
*However, for HDMI signals only, downconversion to 1080P is possible when the output resolution is 4K.
Analog audio output: -10 dBu (10 kΩ or greater load), low impedance, unbalanced, 2 channels, 1 pair (RCA x 2)