IMAGENICS / ISX-U3232

The ISX-U3232 is a matrix switcher with up to 32 inputs and 32 outputs that supports multiple standards including 12G-SDI, 3G-SDI, HD-SDI, SD-SDI, and DVB-ASI.

■12G-SDI Matrix Switcher
■32 Inputs, 32 Outputs
■Compatible Standards:
SMPTE ST 2082-1 ​​Compliant (12G-SDI)
SMPTE ST 2081-1 Compliant (6G-SDI)
SMPTE ST 424 Compliant (3G-SDI)
SMPTE ST 292-1 Compliant (HD-SDI)
SMPTE ST 259-C Compliant (SD-SDI)
DVB-ASI Compliant (270Mb/s)
■Input Signal:
NRZI/NRZ signal, 0.8 V (p-p), 75Ω, BNC, 32 inputs
* When connecting SDI signals output from devices that output DC power (e.g., devices that superimpose camera power), ensure that the SDI signal does not contain DC potential and does not fluctuate.
Otherwise, the high-frequency device built into this unit may be damaged.
■ Output Signal: NRZI/NRZ signal, 0.8 V(p-p), 75 Ω, BNC, 32 inputs
■ Signal Compensation Distance
12G-SDI (pathological signal) input: Automatic compensation up to 70 m with L-5.5CUHD coaxial cable
6G-SDI (pathological signal) input: Automatic compensation up to 60 m with L-5CFB coaxial cable
3G-SDI (pathological signal) input: Automatic compensation up to 150 m with L-5CFB coaxial cable
HD-SDI (pathological signal) input: Automatic compensation up to 200 m with L-5CFB coaxial cable
SD-SDI (pathological signal) input: Automatic compensation up to 200 m with L-5C2V coaxial cable
■ Reference Sync Input
Bi-level/tri-level sync signal or black burst signal, 0.3 V(p-p) to 0.6 V (p-p)
(12G-SDI and 3G-SDI only support black burst signals)
1 x BNC x 2 loop-through, high impedance
■External Control
10Base-T/100Base-TX RJ-45 RS-232C (D-sub 9-pin male, mating thread: inch)
RS-422A (D-sub 9-pin female, mating thread: inch)
■Other Features
SDI signal reclocking
Output slew rate switching function based on automatic input signal detection
Input selection information backup function and 32 pattern memory
Blanking switch function based on reference synchronization (SMPTE RP168-2002 compliant)
(Blanking switch function cannot be used with DVB-ASI)
Mixed input of 12G/3G/HD/SD is possible (Format conversion is not possible)
Dualized and front-panel hot-swappable power supplies
Front-panel hot-swappable cooling fans
Main boards can be replaced without removing them from the rack
Hardware alarm output function (Mini D-sub 15-pin female, inch mating threads)
SNMP trap transmission function (power monitoring, fan monitoring, input/output carrier monitoring, reference monitoring)
Channel count can be expanded by adding boards (maximum 32 inputs, 32 outputs)
■Power supply: AC 100 V to AC 240 V 50 Hz/60 Hz
■Power consumption: 75 W
■Weight: Approximately 11 kg
■Operating temperature and humidity range: 0°C to 40°C, 20% RH to 90% RH (non-condensing)
■Storage temperature and humidity range: -20°C to 70°C, 20% RH to 90% RH (However, no condensation should be present.)
■ Dimensions: 422 (W) x 133 (H) x 326 (D) mm (excluding protrusions)
■ Accessories:
EIA19 rack mount brackets (1 set, 3U),
Japan-specific power cables (3P-3SL) with locking mechanism (2 cables),
3P-2P power adapter plugs (2 cables)