IMAGENICS / UHD-15

This multi-functional HDMI splitter with one input and five outputs supports 4K resolution HDMI signals. Each output channel is equipped with 4K → FHD down-conversion and color space conversion.

■1 Input, 5 Output HDMI Splitter
■Video Signal Format:
TMDS Single Link Signal (HDMI and DVI Signals)
Supported Resolutions: 480i–1080p, 4K60/4:4:4/VGA–UXGA, and WUXGA (Reduced Blanking)
Supported Pixel Clock Rates: 25MHz–600MHz
Supported TMDS Data Rates: 0.75Gbps–18Gbps
Supports HDCP 1.4/2.2, Deep Color (up to 36-bit), and HDR
■Video Input Terminal:
HDMI Type A 19-pin Connector (x1) (※1)(※2)
■Video output terminal:
HDMI Type A 19-pin connector, 1 system, 5-way distribution (※1)(※2)
HDMI cable distance (approximate) (※3) 3, 840x2, 160@60/4:4:4/24bit, etc. Input: 10m Output: 3m
3, 840x2, 160@60/4:2:0/24bit, etc. Input: 20m Output: 5m
1, 920x1, 080@60/24bit, etc. Input: 30m Output: 10m
To watch 4K@60/4:4:4 content, an HDMI cable verified to transmit at 18Gbps is required.
■Analog Audio Input:
Unbalanced, 245mV (rms) (-10dBu), 40kΩ or greater, Maximum Input Level: 2.1V (rms) (+8.8dBu), 2-channel stereo RCA pin jack (1 pair)
■Analog Audio Output:
Unbalanced, 245mV (rms) (-10dBu, 10kΩ or greater load), Maximum Output Level: 2.1V (rms) (+8.8dBu), Low Impedance, 2-channel stereo RCA pin jack (1 pair) (*4)
■Analog Audio Quantization: 48kHz, 24-bit
■Audio Frequency Response:
30H -1dB to +1dB at frequencies from 10kHz to 20kHz
■Audio Crosstalk: 75dB or more (L-R)
■Audio S/N Ratio: 76dB or more
■Audio Distortion: 0.025% or less
■Power Supply/Power Consumption:
AC90V to AC250V 50Hz/60Hz
Power Consumption: 12W (Maximum)
■Size: 210(W) x 44(H) x 230(D)mm (excluding protrusions)
■Weight: Approximately 1.8kg
■Accessories:
1 domestic-use power cable (with 3P-3SL/3P-2P conversion plug)
6 sets of HDMI cable retention brackets (CL-2)