IMAGENICS / ISA-U74

A 7-input, 4-output matrix switcher that supports multiple standards, including 12G-SDI, 6G-SDI, 3G-SDI, HD-SDI, SD-SDI, and DVB-ASI.

■12G-SDI Matrix Switcher
■Compatible Standards:
SMPTEST2082-1 ​​Compliant (12G-SDI)
SMPTEST2081-1 Compliant (6G-SDI)
SMPTEST424 Compliant (3G-SDI)
SMPTEST292-1 Compliant (HD-SDI)
SMPTEST259-C Compliant (SD-SDI)
DVB-ASI Compliant (270Mb/s)
■Input Signal:
NRZI/NRZ signal, 0.8V (p-p), 75Ω, BNC, 7 channels
*When connecting an SDI signal output from a device that outputs DC power (e.g., a device that superimposes camera power), ensure that the SDI signal does not contain a DC potential and does not fluctuate.
Otherwise, the high-frequency device built into this unit may be damaged.
Output signal: NRZI/NRZ signal, 0.8V (p-p), 75Ω, BNC, 4 pairs
Signal compensation distance:
12G-SDI (pathological signal) input: Automatic compensation up to 70m using 5.5C UHD coaxial cable equivalent
6G-SDI (pathological signal) input: Automatic compensation up to 70m using 5CFB coaxial cable equivalent
3G-SDI (pathological signal) input: Automatic compensation up to 150m using 5CFB coaxial cable equivalent
HD-SDI (pathological signal) input: Automatic compensation up to 230m using 5CFB coaxial cable equivalent
SD-SDI (pathological signal) input: Automatic compensation up to 5CFB coaxial cable equivalent Automatic compensation up to 300m
■Reference Sync Input:
Bi-level/tri-level sync signal or black burst signal 0.3V(p-p) to 0.6V(p-p)
(12G-SDI and 3G-SDI only support black burst signals)
1 BNC x 2 loop-through high impedance
■External Control:
100Base-T/100Base-TX RJ-45
RS-232C (D-sub 9-pin male mating thread: inch)
RS-422A (D-sub 9-pin female mating thread: inch)
■Other Features:
SDI signal reclocking function
Output slew rate switching by automatic input signal detection Switching function
Input selection information backup function and 32 pattern memory
Blanking switch function with reference synchronization (SMPTERP168-2002 compliant)
(Blanking switch function cannot be used with DVB-ASI)
Mixed input of 12G/6G/3G/HD/SD is possible (format conversion is not possible)
Dual power supply
Hardware alarm output function (Mini D-sub 15-pin female mating thread: inch)
SNMP trap transmission function (power monitoring, fan monitoring, input/output carrier monitoring, reference monitoring)
Switching event storage function
Prohibited clutter Loss point setting function
Sequential function
Changeover function
■Power supply:
AC90V to AC250V 50Hz/60Hz
■Power consumption: 30W
■Weight: Approx. 2.2kg
■Operating temperature and humidity range:
0°C to 40°C, 20%RH to 90%RH (non-condensing)
■Storage temperature and humidity range:
-20°C to 70°C, 20%RH to 90%RH (non-condensing)
■Size: 210(W) x 44(H) x 230(D)mm (excluding protrusions)
■Accessories:
Two domestic-use power cables (3P-3SL) with locking mechanism
Two 3P-2P power adapter plugs