IMAGENICS / NEX-02R/HF-S

This receiver can transmit HDMI signals up to 4K60/4:4:4 over a single-mode fiber cable up to 10km in distance. It is equipped with a dual HDMI output terminal.

■HDMI Network Receiver
■Single-mode fiber optic cable transmission type
■Video Input
NEX-02R/HF-S (single-mode model)
10GbE Signal: 10GBASE-LR, duplex LC x 1, optical output level -8.2dBm to +0.5dBm,
optical input level -12.6dBm to +0.5dBm, laser wavelength 1310nm, laser safety class 1
Extension Cable: Single-mode optical fiber cable, 9.2μm/125μm, UPC or SPC polished
Transmission Distance: Up to OS110km
■Video Output
HDMI Signal: TMDS single link, HDCP 1.4/2.2 compatible, HDMI Type A 19-pin connector, 1x 2-way distribution
*ARC, HEC, and CEC are not supported.
When the HDMI output signal is 3840x2160/4:4:4, it is automatically down-converted to 1920x1080 depending on the connected device, such as a monitor.
When the HDMI output signal is 4096x2160/4:4:4, it is automatically down-converted to 2048x1080.
Supported Resolutions: D1-D5, VGA-UXGA and WUXGA (Reduced Blanking), 4K24, 4K30, 4K60.
Pixel Clock Rate: 25MHz-600MHz, TMDS Data Rate: 0.75Gbps-18Gbps.
HDMI Cable Length: 1920x1080p up to 10m, 3840x2160@30 up to 5m, 3840x2160@60/4:4:4 up to 2m.
Audio Input LPCM: 32kHz-192kHz, 16-bit or higher. 24-bit, up to 8 channels, 1 duplex LC output
Audio output LPCM: 32kHz to 192kHz, 16-bit to 24-bit, up to 8 channels
1 HDMI Type A 19-pin connector, 2-way distribution
Analog unbalanced: 245mV (rms) (-10dBu, 10kΩ or greater load), Maximum output level: 2.1V (rms) (+8.7dBu),
1 low-impedance 3.5mm mini stereo jack *Analog audio output only supports LPCM.
Audio quantization: 48kHz, 24-bit
Frequency response: -1dB to +1dB from 30Hz to 20kHz
Crosstalk: 73dB or more (L-R)
S/N ratio: 75dB or more
Distortion: 0.025% or less
■USB: HID class equivalent Type-A (2x)
■Other inputs/outputs
LAN: 1000BASE-T/100BASE-TX/10BASE-T, Auto-Negotiation, Auto-MDI/MDI-X, RJ-45 (1x)
RS -232C: Full duplex, maximum 115200 bps, one 3-pin terminal block
■ Power Supply/Power Consumption: DC12V 1.3A 15W (max) (includes two 2.5W USB HID power supplies)
■ Size: 100(W)mm x 25(H) x 150(D)mm (excluding protrusions)
■ Weight: Approximately 510g
Accessories: One AC adapter (12V 3A output),
Two HDMI connector retaining brackets (CL-2),
Two cable ties,
One 3-pin terminal plug