audio technica / ATW-T3202aHH1, Handheld transmitter

A handheld transmitter made by Audio-Technica. The transmitter gain can be adjusted from 10 to 20 dB in 2 dB increments. It is compatible with seven types of separately sold microphone capsules that can be swapped according to the scene. Equipped with a high-pass filter.

◆ IR SYNC for applying receiver settings to the transmitter
◆ Versatile multi-function button
◆ Significantly reduced handling noise compared to previous models
◆ Transmitter gain adjustable from -10 dB to +20 dB in 2 dB steps
◆ Compatible with seven types of interchangeable microphone capsules (sold separately) to suit various applications
◆ Built-in high-pass filter
◆ OLED display for high visibility in any environment
◆ Compatible with Ni-MH rechargeable batteries using the optional ATW-CHG3 charger

■ System Specifications

Transmission Frequency Band: Band HH1: 806.125 – 809.750 MHz (30 frequencies)

Minimum Frequency Step: 125 kHz

Modulation Method: FM

Maximum Frequency Deviation: ATW-T3202aHH1: ±36 kHz (THD: 10%)

Dynamic Range: ATW-T3202aHH1: 115 dB or more, A-weighted, typical

Total Harmonic Distortion: 1.0% or less (at 1 kHz, ±17.5 kHz deviation)

Operating Range: 100 m (in open space without interference)

Frequency Response: ATW-T3202aHH1: 25 – 16,700 Hz (*may vary depending on the installed microphone capsule)

Maximum Simultaneous Channels (Recommended): 6

■ ATW-T3202a Specifications

RF Output: High: 10 mW, Low: 2 mW (switchable), at 50Ω

High-Pass Filter (Low-Frequency Roll-Off): 150 Hz, 6 dB/octave

Power Supply: DC 3V (using two AA alkaline batteries)

Operating Temperature Range: –5°C to 45°C

Battery Life: Approx. 9 hours with AA alkaline batteries; approx. 9.5 hours with Ni-MH rechargeable batteries
(*Varies depending on battery type, usage, and environment)

Dimensions:

ATW-T3202aHH1 (excluding microphone capsule): 193 × φ37 mm

ATW-T3202a/C510HH1: 265 × φ54 mm

Weight (excluding batteries):

ATW-T3202aHH1 (excluding microphone capsule): approx. 200 g

ATW-T3202a/C510HH1: approx. 330 g

■ Accessories Included

Microphone holder (5/8-inch thread) AT8456a

Thread adapter for microphone holder