MADRIX / NEBULA

Variations

This SPI-compatible pixel tape driver directly controls a variety of digital LEDs. It converts Art-Net/sACN/USB signal inputs into SPI outputs, achieving high-quality video output. It can be mounted on a DIN rail or wall, and despite its compact size, it supports up to 2,048 pixel outputs.

■ Power Supply: DC 5-24V (Terminal Block), USB (Type-B)
■ Maximum Load: 6A per port, 12A total (when powering LEDs)
■ Power Consumption: <1.5W (normal), 500mA max. (fuse protected)
■ Output: SPI TTL x 2 (4-pin terminal block)
■ Output Universes: Up to 12 universes (RGB up to 1,024 pixels per port) *Depending on firmware
■ Compatible LEDs: Over 50 types including APA102, WS2812B, SK6812 (More to be added in the future)
■ Ethernet: RJ45 x 2 (Auto MDI-X, daisy chain compatible, 10/100 Mbps, 1 Gbps compatible)
■ USB: USB 2.0 Type-B x 1
■ Dimensions: 90 x 70 x 46 mm
■ Weight: Approximately 110g (132g including terminals and mounting bracket)
■ Operating Temperature: -10 to 70°C
Storage Temperature: -20 to 85°C
Humidity: 5 to 80% (non-condensing)
IP Protection Rating: IP20
LED Indicators: 5 Status LEDs, 4 Network LEDs
RDM Support: Can respond to sensor information as a responder