audio technica / ATM355VF

Ideal for capturing string and woodwind instruments. A miniature condenser microphone for violins, violas, flutes, and other instruments. Designed for use with professional live sound and studio equipment.

Type: Back electret condenser
Polar pattern: Cardioid
Frequency response: 40-20,000 Hz
Low cutoff: 80 Hz, 12 dB/octave
Sensitivity: -39 dB (12.6 mV) (0 dB = 1 V/Pa, 1 kHz)
Output impedance: 200 Ω
Maximum input sound pressure level: 148.5 dB SPL (1 kHz THD 1%)
Dynamic range: 126.5 dB (1 kHz at Max SPL)
Signal-to-noise ratio: 72 dB (1 kHz at 1 Pa, A-weighted)
Phantom Power: DC 11-52 V, 3.5 mA
Switch: Flat, Low-Cut
Operating Temperature Range: -10 to 60°C
Storage Temperature Range: -20 to 60°C, 10 to 90% RH (non-condensing)
Weight: Microphone: 29.5 g, Power Module: 90 g
Dimensions: Microphone: 21.6 x 33 x 200 mm
Power Module: 92 mm length, 18.9 mm diameter
Cable Length: 1.8 m
Output Connector: Power Module - 3-pin XLR-M type
Microphone: cW connector
Optional Replacement Units: UE-O Omnidirectional, UE-H Hypercardioid

*Installed on the power module AT8543.

Accessories: Power Module AT8543, Belt Clip, Violin Mount AT8491V, Flute Mount AT8491F, Joint Adapter AT8493, Hard Case

■ High-sensitivity model with a maximum sound pressure of 148.5dB SPL for clear, balanced response.

The microphone's cardioid polar pattern provides excellent sensitivity in the front of the unit, minimizing feedback and reducing unwanted noise.

The AT8543 Power Module's switchable 80Hz low-cut filter reduces unwanted low-frequency noise. Connect the included AT8543 Power Module to the device's 4-pin connector. The Power Module's output is a 3-pin XLRM-style connector. A switch allows you to select between flat response and low-cut (using an 80Hz high-pass filter).

Compatible with cW-style bodypack transmitters: Can also be used with Audio-Technica cW-style bodypack transmitters.