LOGOS / Fire pit heat-resistant sheet bag

A fire pit sheet that can also be used as a tote bag. Large size 96 x 60 cm

A 2-way heat-resistant sheet bag that can be used as a fire pit sheet.
If you fasten the buttons on both sides, it can be used to transport BBQ grills, stoves, etc. in addition to fire pits, and if you remove the buttons, it is convenient for transporting firewood and long objects.
The heat-resistant fiberglass is coated with silicone to protect the grass and ground from sparks.
After use, the ash that falls on the sheet can be wrapped in a bag, making it easy to carry to the ash disposal area.

*This is an image of the combination with "LOGOS the Pyramid TAKIBI L".
*Only small amounts of ash that have spilled out can be transported. Please refrain from carrying large amounts of ash as the high heat will damage the silicone coating.
*It cannot block high temperatures.

■How to use
1) Spread the sheet out in the installation area and secure the four corners with pegs (sold separately).
*If you cannot drive in the pegs, place weights such as stones on the four corners.
2) Place a grill or fire pit that fits inside the sheet.

Total weight: (approx.) 420g
Size: (approx.) 96cm long x 60cm wide
Storage size: (approx.) 16cm long x 23cm wide x 2cm thick
Main material: Fiberglass (silicon coating)

Performance/Features:
・Fire pit sheet that can also be used as a tote bag.
・For transporting fire pits, BBQ grills, stoves, etc.
・When unfolded, it becomes a heat-resistant sheet that protects the ground from sparks
・Made of heat-resistant fabric

*This product is designed to use the average heat amount of a "fire pit" that is far enough away from the heat source to the ground, such as the Logos Pyramid Grill, as the standard, and is intended to reduce the heat transmitted to the installation location. Please note that it does not completely block heat.

*This product is made of fiberglass. It has the following characteristics because it is different from general fabrics. Please rest assured that it is not a defect.

・Since fine glass fibers are attached to the surface, be sure to wear gloves before handling it. Touching bare skin may cause itching or injury.

- The color of the fabric varies from piece to piece as it is colored using a special heat treatment.
- The color may darken in some areas due to the solvent used to fiberize the fabric.
- Some areas may appear to be frayed, but this is due to the nature of the material and is not a defect.
- The strength of the fabric around the grommets is delicate and different from that of regular fabrics. Please refrain from pulling the fabric around the grommets too hard or applying force to the grommets as this may cause the grommets to come off.