Sonarworks / SoundID Ref. for SP&HP w. Apollo Add-on 測定マイク付き

Enhance your monitoring with SoundID Reference integrated directly into Universal Audio's Apollo X Gen.1 and Gen.2 interfaces. This add-on provides Sonarworks' best-in-class speaker and headphone calibration for accurate sound from stereo to multichannel with minimal latency. A great value package that bundles SoundID Reference for Speakers & Headphones with a measurement microphone.

■Measurement app/plug-in software
■Add-On
■SoundID Reference for Speakers & Headphones Bundle
■Manufacturer's genuine measurement microphone Calibrated Measurement Microphone included

■Main functions
- Speaker and headphone calibration performed directly on Apollo X hardware
・Hardware calibration for popular stereo and surround speaker layouts (supports stereo to 9.1.6ch)
・Hardware calibration compatible with over 500 headphone models
- Multiple outputs can be calibrated at the same time: up to one speaker profile and two headphone profiles (depending on the Apollo X model used)
・Calibration of bass management of stereo speaker setup with subwoofer
Supported target modes: Flat, Dolby Atmos music curve, user custom target, and various device emulation targets via translation check
- Integrated performance with near zero latency.

■About SoundID Reference for Speakers & Headphones
The world's only acoustic correction solution that supports speakers/headphones and all PC outputs
The sound reproduced will vary depending on the influence of the room shape, material, etc. on the monitor speaker, and the characteristics of the headphones. SoundID Reference solves the problem of monitor accuracy and dramatically improves compatibility with other speaker systems.

SoundID Reference consists of measurement software and a calibration plug-in that runs on the DAW side. Its advanced DSP neutralizes room effects on monitor speakers, making the headphones flat. Provides a more reliable reference sound.

■Calibrated Measurement Microphone specifications
・Uses pre-polarized electret condenser capsule
・Frequency response: 20Hz - 20kHz (using the included calibration profile)
・Omnidirectional
・Sensitivity: -37dB/Pa (14 mV)
・Self noise: 24dB
・S/N ratio: 70 dB
・Dynamic range 106dB
・Maximum SPL: 132dB SPL
・Weight: 147g
・Output impedance: 200Ω
・Power supply: 9-52V phantom power
・Maximum sound pressure level: 128dB
*Use of this product requires an audio interface with a microphone input that supports phantom power.

■Operating requirements
For the latest operating environment, please refer to manufacturer site product page .

*Activation key for Apollo Monitor Correction add-on product license (add-on can be activated and used on up to 3 devices)
*Offline use is not supported.