LAUTEN AUDIO / SNARE MIC

Snare Mic is a 4.2-inch FET condenser microphone designed & built to capture the best snare drum sound in every situation, regardless of player, snare type, or location.

[X-RAY SOUND]
A single Snare Mic can replace the traditional multi-mic setup needed to capture the full spectrum of a snare drum. Proper positioning even lets you hear the bottom snares through the top head.

[BUILT FOR THE JOB]
A solid brass headframe with a mildew-resistant dust filter protects Snare Mic from stick hits, dust, and debris on stage or in the studio.

[28 dB OFF-AXIS REJECTION]
Snare Mic captures a snare drum's true impact, body, and timbre while rejecting up to 28dB of off-axis sounds. This means clear, mix-ready sonics with optimal phase coherence straight out of the microphone.

[ONBOARD SOUND SHAPING]
Unlike the filters in your DAW or console, these settings affect Snare Mic’s entire sonic spectrum.

[Specifications]
Type: End-address pressure gradient FET condenser
Capsule: 32mm
Polar Patterns: Cardioid
Freq. Response: 20Hz-20KHz
Dynamic Range: 135dB minimum
SPL Handling: >135DB (0.5%THD@1000Hz)
Impedance: >150 ohms
Self-noise level: < 15dB-A
Signal-to-Noise Ratio: 79dB
Sensitivity: -51dBV/Pa (0dB=1V/Pa 1KHz)
Connector: 3-pin XLR
Power: Requires 48v Phantom Power
Dimensions: 109 x 50mm (mic only) 112 x 71mm (with mount)
Weight: 309g (mic only) 407g (with mount)