LAUTEN AUDIO / LS-308

This one-of-a-kind, side-address condenser microphone hears like a laser, sounds like a ribbon, and is able to withstand a staggering 135dB of SPL without internal padding.

[UNMATCHED ISOLATION]
270 degrees of off-axis rejection allows you to confidently capture loud, impactful sounds live without the need to replace toms or re-track guitars due to bleed.

[DARK BY DESIGN]
Creating a microphone with such strong off-axis rejection had a unique timbral side-effect -- a sound similar to a ribbon microphone but without the fragility.

[HIGH SPL & DYNAMIC RANGE]
Capable of withstanding a staggering 135dB of SPL without internal padding, the LS-308 is nearly impossible to overload. Capture the loudest sound sources reserved for dynamic microphones with ease.

[PREMIUM COMPONENTS]
The LS-308 signal path is finalized with high-resolution, low-distortion polypropylene capacitors and resistors, a US-made low-noise FET, and a custom wound output transformer.

[ANALOG SOUND SHAPING]
Two dedicated filters allow for immediate sound-shaping right at the source, removing the need to change out microphones in order to get the sound you want.

TYPE: SIDE-ADDRESS PRESSURE GRADIENT
FET CONDENSER
CAPSULE: 32MM
POLAR PATTERNS: SECOND-ORDER CARDIOID
FREQ. RESPONSE: 20HZ - 20KHZ (ROLL OFF BEGINS AT 7KHZ DUE TO REJECTION
DYNAMIC RANGE: 135DB MINIMUM
MAX. SPL: >135DB (0.5%THD@1000HZ)
IMPEDANCE: >150 OHMS
SELF-NOISE LEVEL: < 15DB-A
SENSITIVITY: 10.5M/PA -46DBV (0DB=1V/PA 1KHZ)
CONNECTOR: 3-PIN XLR
POWER: REQUIRES 48V PHANTOM POWER