BEHRINGER / CU1A

This is a 2 in/2 out audio interface that allows easy recording using a single Eurorack socket.

CU1A
If you're looking to easily record with your modular synthesizer, the Behringer CU1A is the answer. It's a low-latency 2-in/2-out audio interface that seamlessly integrates into your existing modular setup and connects directly to your computer for easy recording and playback.

Connect & Control
The CU1A features a stereo headphone output with a dedicated level control. The CU1A also works with PC and Mac. No setup required. No drivers required. It also works as a send/return, so you can run your modular sounds through your favorite effect plugins or send beats, samples, and other signals to your modular synth for some very wild sound experiments!

High Resolution, Maximum Power.
By incorporating the CU1A into your setup, you get a high-resolution converter that provides the best audio quality for recording and playback. And because the CU1A is powered via USB C, it won't take power away from your modular synth.

Eurorack Ready
The CU1A is designed to fit into a standard Eurorack case, so installation is easy. Simply connect the power cable to a power source and mount the module using the included screws. This allows you to mix the CU1A with other synth modules for truly unique setups.

Specifications:

USB
Type
USB Type-C

Supported OS
Windows 7 and above Mac OS 10.10 and above

Input:

Analog line level
2 x 3.5 mm TS jacks
Input level switchable -10 dB or +4 dB

USB
USB C

Output:

Analog line level
2 x 3.5 mm TS jacks
Output level switchable -10 dB or +4 dB

Phone
3.5 mm stereo TRS jack

USB
USB C

Controls:

Controls
Headphone volume

Switch
Input level micro
Output level micro
Headphone monitor on/off

Standard operating temperature
5°C - 45°C
(41° F - 113° F)
Dimensions
(H x W x D)
129 x 31 x 36 mm
(5.08 x 1.18 x 1.42")
Eurorack 6 HP
Weight 0.06 kg (0.13 Ibs)