IMAGENICS / CRO-FD24ATX

This is an HDMI optical converter/transmitter that supports both single and multi-fiber transmission. When paired with the receiver CRO-FD24ARX, HDMI (DVI) signals can be transmitted up to 10 km using single mode optical fiber and up to 1 km using multimode optical fiber.

■HDMI/DVI optical extender (single/multi) transmitter
■Video input section: 1 HDMI-A connector
TMDS signal (digital RGB, YPbPr) HDMI-A connector 1 system
Single link TMDS signal (24bit full color signal) 1 system
Pixel clock 25MHz ~ 165MHz (VGA@60 ~ UXGA@60
and WUXGA@60(RB)) (HDCP compatible, DVI signal input possible)
■Audio input section:
Stereo mini jack φ3.5
1 unbalanced analog audio 2 channel system
■Input impedance: Approximately 30KΩ
■Audio frequency characteristics: -1dB to +1dB at 20Hz to 20kHz
■Audio SN ratio: 82dB or more (passed through a 1kHz A-weighted filter)
■Audio distortion rate: 0.05% or less
■Audio sampling frequency: 24bit48kHz linear PCM method
■Maximum audio input level: +10dBu (at HDMI embedded audio output 0dBFs)
■Light output section
Optical output level: -9dBm to -5dBm (average power)
Laser oscillation wavelength: 1.3μm
Laser safety: Class 1 (JISC6802, IEC825-1)
■Compatible optical fiber and connector specifications:
Fiber type: single mode fiber
Category, core diameter, cladding: 9.5μm/125μm when equivalent to OS1
Number of hearts: 1
Polishing: PC polishing, SPC polishing, AdPC polishing, UPC polishing
Connector: SC connector
Fiber type: GI multimode fiber
Category, core diameter, cladding: 50μm/125μm when equivalent to OM3 and OM2, 62.5μm/125μm when equivalent to OM1 (dimensions are reference values)
Number of hearts: 1
Polishing: PC polishing,
Connector: SC connector
■RS-232C:
D-Sub 9 pin male 1 system
Select baud rate from 9.6kbps, 19.2kbps, 38.4kbps
*This device is only capable of one-way transmission from the transmitter to the receiver.
■Built-in functions:
Plug and play function (built-in EDID for emulation)
Test pattern output
Embedded audio conversion function for analog audio,
On-screen operating status information display function
■Transmission distance:
Up to approximately 10km when using single mode fiber
Up to approximately 1km when using multimode fiber
*This is not a guaranteed value. Please note that the possible transmission distance will vary depending on the characteristics of the optical transmission line.
■Power supply: DC5V0.8A
■Power consumption: 4W (maximum)
■ Mass: Approx. 500g
■SIZE: 100(W)x25(H)x150(D)mm *Excluding protrusions
■Accessories:
AC100V27VA50Hz/60Hz 1 AC adapter for domestic use (5V2.3A output)
HDMI connector retainer (CL-1)
1 optical attenuator