TASCAM / MA-BT240

This 1U half-rack size Class-D mixing amplifier features two line inputs, one microphone/line input, and a Bluetooth receiver. It supports both high-impedance and low-impedance connections.

■ Mixing Amplifier

【Speaker Output】

■ High Impedance

Rated Output: 240W × 1ch (70V / 100V)

Connector: Euroblock 5.08mm pitch (2pin)

■ Low Impedance

Rated Output: 120W × 2ch (4Ω / 8Ω, @1k Hz 1% THD)

Connector: Euroblock 5.08mm pitch (4pin)

【Input】

■ Microphone/Line Input (MIC/LINE IN)

・Connector

Front: Combo Jack

Rear: Euroblock (Balanced) 3.81mm pitch

・When MIC is selected

Maximum Input Level: -30dBu

Minimum Input Level: -65dBu

Input Impedance: 2kΩ or higher

・When LINE is selected

Maximum Input Level: +20dBu

Nominal Input Level: +4dBu

Input Impedance: 10kΩ or higher

■ Line Input (LINE IN 1/LINE IN 2)

? Connector: RCA pin jack (unbalanced)

? Maximum Input Level: +6.0dBV

? Rated Input Level: -10.0dBV

? Input Impedance: 10kΩ or higher

【Output】

■ Line Output (LINE OUT)

? Connector: RCA pin jack (unbalanced)

? Maximum Output Level: +6.0dBV

? Rated Output Level: -10dBV

? Output Impedance: 200Ω

■ Bluetooth?

? Version: 5.1

? Output Class: Class 2 (Line-of-sight communication range: approx. 10m *?)

? Supported Profiles: A2DP

? Codecs: SBC, AAC

■ External Control (VOL.REMOTE: For output volume adjustment)

? Connector: Euroblock 3.81mm Pitch (3-pin)

(1: Vcc 5V / 2: Control / 3: GND)

■Power Supply: AC100 - 240V, 50/60Hz

■Cooling Method: Natural Convection Cooling

■Operating Temperature: 0℃ - 40℃

■Power Consumption

Rated: 58W (1/8 output, 1kHz sine wave, @4Ω)

Idle: 18W

■Dimensions: 214(W) × 44(H) × 298(D) mm

■Weight: 2.5kg

■Included Items:

・Power cord x 1

・3P-2P adapter x 1

・Bluetooth antenna x 1

・Cable tie kit x 1

・Rubber feet x 4

・High impedance Euroblock x 1

・Low impedance Euroblock x 1

・Microphone input Eurolock x 1

? Euroblock for REMOTE x 1

? Startup Guide (with warranty) x 1

? TASCAM ID Registration Guide x 1