SONY / HVL-F32M Z

A compact and powerful flash that is ideal for the α7 series. Despite its compact size, it also supports bounce shooting when shooting vertically.

■Flash for digital single-lens camera α
■Format:
Auto electroflash with light intensity control method using pre-flash
*Clip-on type, with auto zoom function
Multi-interface shoe compatible type
High speed sync function
Light intensity level switching
wireless flash function
bounce function
■Light level switching:
22 steps (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128) 1/3 steps
■Number of flashes/flash interval (alkaline batteries)*3:
Approximately 120 times or more approximately 0.1-5.0 seconds
■Number of flashes/flash interval (nickel metal hydride battery)*3:
Approximately 150 times or more approximately 0.1-4.0 seconds
■Continuous light emission performance:
Can track 40 consecutive shots at 5 frames per second (light level 1/32,105mm, uses nickel metal hydride batteries)
■Irradiation angle: Covers the angle of view of a 24-105mm lens, automatically switches according to the focal length of the lens. Covers the angle of view of a 15mm lens when a wide panel is attached.
■Bounce shooting:
Possible (click position: top: 30°/45°/60°/75°/90°, bottom: 8°, right: 30°/45°/60°/90°/120°/150°/180°, left: 30°/45°/60°/90°)
■Dimmer method: Light intensity control by pre-flash (P-TTL/ADI dimming)/manual flash
■Wireless flash: Can be used as a controller or off-camera flash
■High speed synchronization function:
With flat light emission, full shutter speed synchronization is possible when used with a Sony interchangeable lens digital camera equipped with a multi-interface shoe and an auto-lock accessory shoe *4.
■White balance automatic correction function: Possible (excluding DSLR-A100)
■Screen size optimization zoom control function: Possible (excluding DSLR-A100)
■Dust-proof and drip-proof: Designed with consideration to dust and drip-proofing.
■Power source: 2 AA batteries (alkaline/nickel metal hydride) of the same type
■SIZE: Approximately 66(W)x119(H)x82(D)
■Weight: Approximately 235g (battery not included)
■Included items:
Mini stand (1), carrying case (1), terminal protection cap (1)

*1 When combining HVL-F42AM/F20AM with the α (A mount) main body for off-camera shooting, off-camera shoe FA-CS1AM (sold separately) and off-camera cable FA-CC1AM (sold separately) are required.
*2 35mm equivalent focal length when attached to an APS-C size single-lens camera
*3 According to our test conditions
*4 Separately sold shoe adapter ADP-AMA is required to install.