BOSE / 811434-0210

ArenaMatch Utility speakers provide zone-fill coverage and superior foreground sound pressure. It reproduces the same sound quality as the ArenaMatch array module in a compact body. Equipped with the same EMB2S compression driver as the ArenaMatch array, it reproduces even sound. It is also IP55 compliant for all weather conditions. Achieve zonal fill coverage in stadiums, arenas, and outdoor entertainment venues.

■System performance
Frequency characteristics (±3 dB) *1 90 Hz to 16 kHz
Frequency range (-10 dB) 80 Hz to 18 kHz
Nominal coverage pattern (horizontal x vertical) 90° x 60° (rotatable high frequency horn)
Recommended high-pass filter 80 Hz (minimum 12 dB/octave) filter
Crossover passive (crossover frequency: 1.4 kHz)
70/100 V transformer tap settings 70 V: 5 W, 10 W, 20 W, 40 W, 80 W
100V: 10W, 20W, 40W, 80W

■Bose Life Cycle Test *2
Allowable input (continuous) 200 W
Allowable input (peak) 800 W
Free field wall/ceiling mounting
Sensitivity (SPL/1W @1 m) *4 91 dB 93 dB
Maximum sound pressure level (continuous, @1 m, calculated value) *5 114 dB 116 dB
Maximum sound pressure level (peak, @1 m, calculated value) 120 dB 122 dB

■AES transducer test *3
Allowable input (continuous) 250 W
Allowable input (peak) 1000 W
Free field wall/ceiling mounting
Sensitivity (SPL/1W @1 m) *4 91 dB 93 dB
Maximum sound pressure level (continuous, @1 m, calculated value) *5 115 dB 117 dB
Maximum sound pressure level (peak, @1 m, calculated value) 121 dB 123 dB

■Transducer
Low frequency Bose LF8 high excursion 8-inch woofer (2-inch voice coil) x 1
High frequency Bose EMB2S titanium diaphragm neodymium compression driver (2 inch voice coil) x 1
Nominal impedance 8 Ω

■Physical specifications
Enclosure Material Outdoor grade birch wood
Finish 2-layer polyurethane coating, white
Grille Perforated stainless steel with powder coating, sound absorbing material, stainless steel mesh
Usage environment: Suitable for outdoor installation directly exposed to wind and rain (IEC 60529: IP55)
Connector Barrier strip x1 (compatible with 10-18 wire gauge)
Hanging/Installation 3 screw holes (M8) for U bracket (per side), 4 M8 screw holes on the back (127 x 70 mm, 4 bolt pattern)
Dimensions (H x W x D): mm 235 x 498 x 316 (including U bracket)
Dimensions (H x W x D): inches 9.3 x 19.6 x 12.4 (including U bracket)
Mass (speaker only) Approx. 10.6 kg
Mass (including U bracket) Approx. 12.6 kg
Packing mass: Approximately 14.2 kg
Accessories Steel U bracket (included), wall bracket (optional)