LEWITT / MTP W950

A premium professional handheld microphone with a detachable, wireless 1-inch true condenser capsule that brings studio sound quality to the stage. This is a recommended item for vocalists who want to stand out from the crowd!

■For all stages, rehearsals, and recordings.
This product provides outstanding studio sound quality for stage performances and rehearsals.
Industry-leading 90% real rejection and feedback immunity for clear, feedback-free live mixes and monitoring.
The two-layer structure also protects the capsule from moisture while minimizing wind noise and plosive sounds.
The cupping-safe design ensures that the tone will not be distorted no matter how you hold the microphone.

■The best sound quality even on stage.
A removable, wireless 1-inch true condenser capsule provides beautiful high-end studio quality.

■Wired and wireless with one microphone.
Use it as an XLR microphone when performing in a rehearsal room, small venue, or recording studio.
On large stages, you can use it as a wireless microphone by simply unscrewing the capsule and attaching it to your favorite wireless transmitter*.

This product can also be sold as just the microphone capsule/handle.

[Main features]
・Premium handheld microphone
・1 inch true condenser capsule
・Clear live mix of studio quality
・Adopts a detachable capsule that can be used wirelessly
・Higher sound quality due to cupping safety design
・Optimized design against moisture and plosive sounds
- Tested and approved by professional live sound engineers and artists
・Contents: Carrying case, handheld microphone mount, Windscreen

[Product specifications]
Microphone type: Condenser, externally polarized
Acoustic operating principle: Pressure gradient transducer
Transducer Φ: 25.4 mm, 1 in
Polar pattern：cardioid, supercardioid
Sensitivity: 8.1 mV/Pa, -41.8 dBV/Pa
Equivalent noise level: 21 dB (A)
Max SPL: 140 dBSPL (0.5% THD)
Dynamic range: 119 dB (A)
S/N ratio: 73 dB (A)
Pre-attenuation pad:
0 dB
-12 dB
Low cut filter: lin, 120 Hz
Internal impedance: 217 Ω
Supply voltage: 48V ± 4V
Current consumption: 7.5 mA
Connector: Gold plated 3-pin XLR, Capsule thread: 1?-28UN-2A
Microphone dimensions: 51 dia x 183 mm
Microphone weight: 397 g

Microphone measurements: Compliant with IEC 60268-4 | Phantom power: IEC 61938 | Noise measurements: IEC 60268-1