SONY / FA-WRC1M C

This is a wireless commander that enables radio wireless control of Sony flashes.

■Wireless commander

[Basic product information]
■SIZE: Approximately 58.0(W)x65.8(H)x83.7(W)mm
■ Mass: (approx.) 93g

[Wireless function]
■Communication method: Radio wave type
■Frequency range: 2.4GHz band
■Communication channels: 14 channels (Auto, manual selection possible)
■Maximum reach distance: (approx.) *1 30m
■Number of groups:
3 groups (TTL/manual), 5 groups (group)
■Maximum number of connectable devices: 15 devices
■Operating mode:
Wireless flash photography (TTL/manual/group), remote release photography
■Light level switching:
25 steps (1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256) 1/3 steps *2 *3
■High speed synchronization function: Possible
Flat light emission allows full shutter speed synchronization when used with a Sony interchangeable lens digital camera equipped with a multi-interface shoe.
Test flash possible with test button

[External terminal]
■Multi-interface foot available
■With external terminal synchro terminal (output)
■Multi/micro USB terminal available

[Compatible models *4]
■Compatible cameras:
Sony interchangeable lens digital camera *5

【power supply】
■Main power supply:
AA alkaline battery
2 AA nickel metal hydride batteries

*1 Depends on usage environment
*2 Limited to 1/128 during high-speed sync shooting
*3 When using HVL-F32M, please use the flash output at 1/16 or higher when shooting HSS.
*4 Please check the dedicated support site
*5 Separately sold radio wave wireless receiver (FA-WRR1) is required.
*6 Excluding warranty and instruction manual

[Accessories*6]
■Name/model number (quantity):
Terminal protection cap (1)
Case (1)
Operating time: Approximately 12 hours (using alkaline batteries)