BOYA / BY-XM6-K1

Wireless microphone for smartphones and SLRs. Equipped with headphone output for monitoring. LCD model allows you to visually check the status of each transmitter from the receiver. Easy connection by simply connecting to the device with a 3.5mm mini plug. Pairing is completed simply by turning on the power. Compact and lightweight. Captures the target sound clearly and achieves high quality sound. Easy to use wireless microphone system with simple operation. Comes with charging case.

■Small 2.4GHz wireless microphone

The BOYA BY-XM6-K1 is a 2.4GHz adaptive frequency hopping wireless microphone system, consisting of one transmitter, one receiver, and a charging case.

Advanced technology for stable signal transmission
The BY-XM6 K1 adopts advanced adaptive frequency hopping (AFH) wireless signal transmission technology, allowing the microphone to automatically avoid the disturbed hop frequency part to achieve stable signal transmission without obstacles and up to 100 meters (328 feet) range.

Professional audio recording and distribution
Equipped with a high-quality capsule, a signal-to-noise ratio of more than 84dB as well as a signal processing circuit with a distortion rate of less than 0.1%, it provides high-quality, clear & low-noise audio.

Super multi-functional & easy-to-use wireless microphone kit
The transmitter and receiver are equipped with vivid and easy-to-read OLED displays, allowing you to precisely adjust the signal transmission. In addition, the transmitter has a built-in omnidirectional microphone, so you can attach the transmitter to your neck to pick up sound, or connect a lavalier microphone to the MIC IN jack on the transmitter to pick up sound. In addition, this microphone kit is equipped with both a 3.5mm TRS-TRRS audio cable as well as a 3.5mm TRS-TRS audio cable. Therefore, it can be used with digital SLR cameras, mirrorless cameras, smartphones, computers, etc.

The BY-XM6 K1 is equipped with a powerful charging case that is easy to carry, so you can easily carry it outdoors. It has a built-in powerful battery and can fully charge the receiver and transmitter at the same time without cables. In addition, the power indicator on the charging case makes it easy to check the battery capacity and charging status.


- Ideal for YouTube videos, live streaming, interviews, recording, etc.
- Works with DSLRs, mirrorless cameras, smartphones, and PCs
- 2.4GHz wireless
- High fidelity and low noise audio processing and system
- Easy to use, vibrant, informative OLED display
- Built-in omnidirectional and lavalier microphones
Transmitter has a lavalier microphone
- Receiver has a headphone output for real-time monitoring
- Switchable between stereo and mono output
- Built-in lithium-ion battery lasts 7 hours for the transmitter and 6.5 hours for the receiver
- 6.5 hours for the receiver
- Can be used up to 100m in an unobstructed area
- Equipped with a portable charging case


TX transmitter
Transmission method: 2.4GHz digital frequency
Modulation method: GFSK
Operating range (without obstacles): Up to 328 feet (100m)
RF output power: <10mW
Polar pattern: Omnidirectional
Frequency response: 50Hz to 18KHz
Maximum SPL
Built-in microphone 120dB SPL
Lavalier microphone: 110dB SPL
Sensitivity
Built-in microphone: -39dB
Lavalier microphone: -39dB
SNR: > 84dB
Power source
Built-in Li-ion battery or USB-C DC 5V or charging contact
Built-in battery life approx. 7 hours
Antenna: PIFA antenna
Audio input: 3.5mm TRS MIC/LINE IN jack or built-in microphone
Weight: Approx. 32g (1.13oz)
Dimensions: 62.1 x 31.6 x 16.5mm
Operating temperature: -10℃ to 50
Storage temperature: -20℃ to +55

RX receiver
Transmission method: 2.4GHz digital frequency
Modulation method: GFSK
Operating range (without obstacles): Up to 328 feet (100m)

Audio output

3.5mm headphone jack

3.5mm TRS output

Audio output level: -60dBV to -20dBV

Power source

Built-in Li-ion battery or USB-C DC 5V or charging port

Built-in battery

Run time: Approximately 6.5 hours

Antenna: PIFA antenna

Weight: Approximately 32g (1.13oz)

Dimensions: 62.1 x 31.6 x 16.5mm

Usage temperature: -10℃ to 50

Storage temperature: -20℃ to +55

Charging case

Power requirements: USB-C DC 5V/1.5A

Power capacity: 3000mAh

Box charging time: 4.5 hours

Weight: 200g

Dimensions: 125 x 96.8 x 35.6mm

Operating temperature: -10℃ to 50
Storage Temperature: -20°C to +55°C