ATOMOS / ATOMSHB002

4K HDMI/3G-SDI compatible high brightness HDR compatible monitor. Equipped with a 7-inch 2200nit high brightness HDR compatible monitor.

■High brightness HDR compatible monitor compatible with 4K HDMI/3G-SDI

[Structure]
■Case material: polycarbonate, ABS plastic
■Cooling: Automatically controlled fan and heat sink
■Main power button: Power on and off/Screen lock and unlock

[Power supply]
■Supported input voltage (battery): 6.2V-16.8V
■Battery voltage: 7.2V
■Operating voltage: 5.8V-7.2V
■Compatible batteries: Up to 2 ATOMOS NP-F series batteries can be installed
■Battery operating time: 5200mAh up to approx. 2 hours/7800mAh up to approx. 3 hours
■DC input: Locking DC plug
■Continuous power supply: Supported with 2 battery slots
■DTAP: Supported with optional D-Tap to DC cable

[Monitor]
■Touch screen: SuperAtom IPS panel (capacitive touch)
■Screen size: 7 inches
■Screen resolution: 1920 x 1080
■PPI: 325 PPI
■Aspect ratio (video display): 16:9
■Color depth: 10-bit (8 + 2 FRC)
■Backlight: Edge-lit
■Brightness: 2200nit +/- 10%
■Aspect ratio (video display): 16:9 (image display)
■Color gamut: Rec.709
■Calibration support: Atomos calibrator compatible
(ATOMOS USB serial cable, ATOMCAB018 or ATOMCAB004 and Xrite i1 Display Pro/Plus are required separately)

[Gamma and color space processing]
■3D LUT display: .Cube format
■3D LUT downstream: Loop output (HD only)
*HD output when outputting 4K
■3D LUT 50/50: Supported
■Monitoring mode: Native/HLG/PQ/3D LUT
■HDR output conversion: HLG/PQ
■Gamma:
Sony SLog/SLog2/SLog3, Canon CLog/CLog2/Clog3, Arri Log CEI160/LogCEI200/LogCEI250/LogCEI320/LogCEI400/LogCEI500/LogCEI640/LogCEI800/LogCEI1000/LogCEI1280/LogCEI1600, Panasonic Vlog, VC JLog1, Red LogFilm/Log3G10/Log3G12, FujiFilm Flog, PQ(HDR10), HLG, Nikon N-Log, Olympus OM-Log, Leica L-Log
■Gamut:
BT2020, DCI P3, PDCI p3 65, Sony SGamut/SGamut3/SGamut3.cine/Canon Cinema/DCI P3/DCI P3+/BT2020, Panasonic V Gamut, Arri Alexa Wide Gamut Rec709, JVC LS300, Red DragonColor/DragonColor2/RedColor2/RedColor3/RedColor4/RedWideGamut

[Video input]
■HDMI: 1xHDMI(2.0)4Kp60
■SDI: 1x3G SDI-2k p60
*Please note that if the SDI cable is longer than 50m, the image will be distorted or will not be displayed.
■Color depth: 8/10-bit
■Video chroma subsampling: YCbCr 420&422

[Video output]
■HDMI: 1xHDMI(2.0)4Kp60
■SDI: 1x3G SDI-2k p60

[Video signal conversion]
■HDMI→SDI: Supported
■SDI→HDMI: Supported

[Audio input/output]
■HDMI: 2ch 24-bit (input dependent)
■SDI: 8ch 24-bit (input dependent)
■Headphone output: 3.5mm stereo mini terminal (2ch)

[Timecode/sync]
■Supports overlay data: HDMI and SDI

[Input connector/resolution/frame rate (progressive/interlace) *screen output only]
■HDMI 4096x2160(4K DCI): 23.98p, 24p, 25p, 29.97p, 50p, 59.94p
■HDMI 3840x2160 (4K UHD): 23.98p, 24p, 25p, 29.97p, 50p, 59.94p
■SDI 2048x1080 (2K DCI): 23.98p, 24p, 25p, 29.97p, 50p, 59.94p
■HDMI/SDI 1920x1080(FHD): 23.98p, 24p, 25p, 29.97p, 30p, 50p, 59.94p, 60p, 50i, 59.94i, 60i
■HDMI/SDI 1280x720 (HD): 50p, 59.94p, 60p

[Supported media]
■SD card: Used for LUT loading and firmware updates
■File system: exFAT

[On-screen tools]
■Image analysis multi-screen:
Image, waveform selection, histogram, vectorscope, audio meter
■Waveform: Supports three sizes and positions
■Histogram: Luma and RGB
■RGB parade: Supported (three sizes and positions)
■Vectorscope: Supported (two sizes and positions, and magnification)
■Magnification: 3 types x1/x2/x4
■Focus peaking:
Color selection , Focus Assist Sharp, Threshold Setting, Color, Monochrome, Contour Only
■False Color: Supported
■Zebra: Supported (Adjustable)
■Color Channel Separation: Blue only
■Cine Frame Guide:
2.4:1, 2.35:1, 1.9:1, 1.85:1, 4:3
■Social Frame Guide: 9:16, 1:1, 1.9:1, 4:5
■Safe Area Display: Action and Graphics
■Grid Display: 9 Grid
■Anamorphic De-Squeeze:
1.25x1.33x, 1.5x, 1.8x, 2x
■Display Flip:
Vertical and Horizontal Selfie Mode

【On-board Processing Function】
■4K UHD→HD downconversion: Supported
■DCI crop: Supported

[External device control function]
■2.5mm serial terminal:
Supported with USB-C→serial cable (ATOMCAB018)
■USB: Used for future camera control
※Firmware update support

[Other]
■Package contents: Accessories included:
SHINOBI 7, AC adapter, Quick Start Guide (English version)

[Manufacturer's warranty]
■Period: Standard 1 year
※Extended to 3 years by user registration within 1 year from the date of purchase*LCD panel/accessories not included

[Weight]
■Weight of main unit only: 577g (excluding battery)
■Mounting screw holes: Top: 1/4 inch x 1, Bottom: 1/4 inch x 1
■SIZE: 193(W)x33(H)x39(D)mm