UDO Audio / Super 6 Black

The Super 6 is a 12-voice polyphonic, binaural analog hybrid synthesizer. It is the result of a harmonious fusion of cutting-edge FPGA digital hardware oscillators and voltage-controlled analog technology from vintage equipment, delivering gorgeous analog sound that can instantly respond to the demands of any player.

Super 6 is a 12-voice polyphonic, binaural analog hybrid synthesizer. It is the result of the harmony and fusion of cutting-edge FPGA digital hardware oscillators and voltage-controlled analog technology that was widely used in vintage equipment, and outputs gorgeous analog sound that can instantly respond to the demands of various players. Its rich sound quality, which combines delicacy and power, is formed by a unique super wave table core, binaural analog signal path, and advanced modulation. Using the sophisticated control panel, players can freely create sounds according to their overflowing sensibilities.

[Product Specifications]
■DDS 1 (Oscillator 1)
FPGA-based 50MHz sampled Superwave oscillator core + centroid oscillator, 6 sister oscillators can be dynamically phase shifted in the stereo field
Waveforms: Sine, sawtooth, square, triangle, noise, and 16 user-downloadable alternative waveforms
DDS 1 Alternative Waveform Format:
4096-point normalized single-cycle waveform
16-bit signed integer samples
Bandwidth Limit Sampling frequency/8 (Nyquist frequency/4), 512Hz upper passband limit when 4096Hz sampling frequency
Binary file without header data, file extension .ws6
■DDS 2 (Oscillator 2)
FPGA-based 50MHz sampled algorithmic oscillator core
Waveforms: Sine, sawtooth, square, triangle, noise, pulse
DDS Can be hard-synced to 1
LFO mode
Sub-oscillator mode (available in LFO mode)
Pulse wave (variable pulse width, PWM possible)

■DDS Modulator
DDS 1 and DDS 2 pitch can be modulated with LFO and envelope
DDS 1 can be set to 1/2 super mode or full super mode
Detune spread control by super waveform sister oscillator
Pulse width control of pulse wave
Detune spread modulation by super waveform sister oscillator, pulse width of standard waveform can be modulated using LFO and/or ENV 1
Deep FM sound by cross modulation from DDS 2 to DDS 1

■Audio Input
Stereo audio input via VCA, VCF, and effect section
Variable gain input stage allows envelope and LFO 1 gate trigger according to audio input level

■LFO 1
Main LFO can be selected between low and high frequency modes, rate adjustable from 0.05 Hz to 20 kHz
Stereo effect using binaural sound engine with left and right phase control
Free running or note-on reset
One shot mode allows LFO 1 to act as an additional envelope
Keyboard tracking mode for high frequency LFO (useful for FM sounds)
LFO 1 can be mapped at a fixed rate through the DDS 1 or DDS 2 audio path, or in high frequency mode with tracking, and can also be used as a drone or third oscillator
Sequencer and arpeggiator can be synced to an external clock

■Mixer
Adjusts the mix level of the DDS 1 and DDS 2 audio signals
Adjusts the split point on the keyboard for crossfaded DDS 1 and DDS 2 (or audio input) in X-Fade mode

■Voltage controlled filter
The SSI2144 is a 100% ... It replicates the State Micro Technology SSM2040, believed by many to be the best sounding analog synthesis filter IC ever made. The SSI2144 is based on a modified ladder topology patented by Dave Rossum, allowing for a rich tonal character that exhibits the best of subtractive synthesis. Analog 4-pole low-pass filter (can self-oscillate)

2-stage overdrive

Fixed frequency high-pass filter or band-pass response linked to low-pass filter

Selectable keyboard tracking modes and filter autotune for precise keyboard tracking

Modulation by ENV 1 and/or ENV 2, LFO 1 and DDS 2

■Voltage-controlled amplifier

Analog VCA with selectable fixed or variable envelope (ENV 2) modulation

Modulation by LFO 1

Dynamics control with selectable velocity sensitivity

■ENV 1

Invertible hold, attack, decay, sustain and release stages, mappable in the modulation matrix

Looping mode with selectable keyboard tracking, usable as LFO or FM source

■ENV 2
Attack-Decay-Sustain-Release, multiple destinations

■Keyboard and Controller Section
49-key Fatar keyboard with velocity and aftertouch
2-axis bender with LFO triggering
Voice modes: Poly 1, Poly 2, Solo, Legato, Variable Size, Variable Type Unison
Dedicated controls adjacent to the keyboard for DDS 1/2 pitch and VCF cutoff modulation of the bender
LFO 2 has rate and delay controls, selectable between trigger and always-on modes
Variable portamento
Expression and sustain pedal inputs
Spring-lever keyboard octave selector
MPE MIDI compliant: Supports note on/off velocity, polyphonic aftertouch, polyphonic pitch bend, and polyphonic expression

■Modulation Matrix
Intuitive modulation matrix can be mapped to defined destinations and a wide range of front panel controls
LEDs provide clear feedback of mapping and modulation depth
20x audio rate modulation calculations

■Arpeggiator/Sequencer
MIDI-syncable multi-mode arpeggiator, smart hold function
MIDI-syncable 64-step sequencer, programmable notes, rests, slides, accents, and track lengths
LFO 1 and delay controls can be synced to the arpeggiator/sequencer clock
16 rewritable memory locations for storing sequences

■Effects
Dual-mode stereo chorus with 24bit 192kHz processing
24bit 192kHz Stereo delay with sync/modulation by processing

■Performance
128 rewritable patch memory with 64 factory patches and 64 free slots for user patches
Excellent build quality, easy to access interface without buttons, sliders, knobs or menus

■Inputs/Outputs
MIDI In, Out, Thru (DIN connector)
USB IO for MIDI control, patches, sequences and waveform management
Audio input (stereo 3.5mm jack)
Main Left and Right Outputs (unbalanced 3.5mm jack)
High quality stereo headphone power amplifier

■Integration
Patches, sequences and waveform files can be saved and loaded by connecting directly to a computer with a USB cable. No additional drivers or applications are required.
Easy OS upgrade via USB

Dimensions
Width: 845mm
Depth: 360mm
Height: 105mm
(including knobs)
Weight: 9.2Kg
Included items: AC cable