FLAME / MemoSlider

The 8-step sequencer consists of 8 knobs and the steps are selected using a slider.

MEMOSLIDER is a programmable analog slider module. It can also be used as an 8-stage modulation sequencer, allowing users to switch steps using the module's faders or CV inputs. Depending on the selected play mode, you can freely switch steps by manually operating the slider, or you can synchronize the timing of the switch to an external clock signal.

In addition, there are trigger and reset inputs that allow the sequencer to be used like a traditional analog step sequencer. The slider can then be used to change the playback direction and the number of steps used, which is very useful for jam sessions.

Play mode
SLIDER mode
Manually operate the slider to select one of eight steps and output CV.

Generates a trigger signal when changing the step value.

The step value can be adjusted using the eight knobs. The two CV outputs output CVs of 0V?+10V and -5V?+5V, respectively. The glide option smooths the transition between steps.

S&H mode

Select one of eight steps by manually operating the slider or an external CV, and output the CV in sync with the external trigger signal.

Generates a trigger signal when changing the step value.

The step value can be adjusted using the eight knobs. The two CV outputs output CVs of 0V to +10V and -5V to +5V, respectively. The glide option smooths the transition between steps.

STEPSEQUENCER mode

When this mode is selected, MEMOSLIDER can be used like a traditional analog step sequencer. The trigger and reset inputs are used to play the sequencer.

The slider can be used to change the playback direction and the number of steps used. This function is very useful for jam sessions.

A trigger input to the reset input resets the sequence (returning to step 1).

Generates a trigger signal when changing the step value.

The step value can be adjusted using the eight knobs. The two CV outputs provide 0V to +10V and -5V to +5V CV respectively. The glide option smooths the transition between steps.

Width: 10HP
Depth: 50.5mm
Current Consumption:
+12V: 40mA
-12V: 5mA